Table of Contents
Advertisement
Basic Scanning Operations Using the Ridoc Desk 2000 Lt
D
When you want to configure the scanning area, follow the steps below.
Note
When you do not configure the scanning area, continue from step E.
A Click [Preview] .
The original that was placed is scanned and the [Preview] dialog box ap-
pears. The scanning area in the preview appears within the broken lines.
B Assign the scanning area by dragging a border or the top line.
When reconfiguring the area, click
wards its opposite corner.
3
Note
For details about the preview, see the TWAIN Driver Help file.
Depending on the scanning resolution, the area to be scanned may pos-
sibly be subject to restrictions. For the relationship between the resolu-
tion and the scanning area, see P.23 "The Relationship between the Data
Size and the Scanning Area, as well as the Resolution" .
The resolution of the preview screen is fixed. However, when different
values have been assigned for the X, Y resolutions, the preview screen
and the scanned image will look different.
C Click [Close].
The [Preview] dialog box closes.
E
Click [Scan].
The original is scanned and displayed in the view window of the Ridoc Desk
2000 Lt while the scanner control dialog box closes automatically.
Note
The scanned image can be edited, including rotating it and cutting it to
size, and printed after having been edited. For editing and printing opera-
tions, see the Ridoc Desk 2000 Lt Help file.
F
Save the scanned image.
A In the [File] menu, click [Close].
The [Input Document Information] dialog box appears.
B Input the file name and click [OK].
The image is stored in the Ridoc Desk 2000 Lt, and the Ridoc Desk view
closes.
Note
The stored image can be written as a file. For details, see the Ridoc Desk
2000 Lt Help file.
G
Close Ridoc Desk 2000 Lt.
18
and drag one corner of the area to-
7,19
Advertisement
Table of Contents
