GeoMax Zenith35 Series Quick Manual page 7

ON/OFF key
Function button
Instrument Components
Key
ON/OFF

All functions described assume the Zenith35 is already on.
Button
Function
Function
If Zenith35 is off:
Turns on Zenith35 when held for 2 s.

While the Zenith35 is booting the two Power
LEDs flash.
If Zenith35 is already on:
Turns off Zenith35 when held for 2 s.
Function
Press and hold button for <1 s.
Switches the Zenith35 between rover or base mode.
Press and hold button for 3 s.
Updates the base position coordinates when Zenith35
is in base mode. The RTK base LED flashes for 2 s.
When no position is available, the LED flashes red.
Zenith35 | 6
en