GeoMax Zenith35 Series Quick Manual page 12

Step Description
1. To remove a battery, push the slide fastener of the battery compart-
ment in the direction of the arrow with the open-lock symbol and
open the battery compartment.
2. Push the locker sideward and at the same time pull out the battery.
This releases the battery from its fixed position.
3. Remove the battery.
4. To insert battery, push the slide fastener of the battery compartment
in the direction of the arrow with the open-lock symbol.
5. Open the battery compartment.
6. With the battery contacts facing upwards, slide the battery into the
battery compartment.
7. Push the battery backwards so that it locks into position.
8. Close the battery compartment and push the slide fastener in the
direction of the arrow with the close-lock symbol.
Operation
en
Zenith35 | 11