The Fluke 67 MAX accuracy complies with and is accuracy tested in accordance with ASTM E1965-98 and ISO 80601-2-56 standards. The Fluke 67 MAX meets the performance and labeling requirements provided in the U.S. Food and Drug Administration’s April 2020 Enforcement Policy for Clinical Electronic Thermometers During the Coronavirus Disease 2019 (COVID-19) Public Health Emergency.
Page 3
Introduction The Fluke 67 MAX Infrared Thermometer (the Product) can determine the surface temperature by measuring the amount of infrared energy radiated by the subject’s skin. Contact Fluke Corporation Fluke Corporation operates worldwide. For local contact information, go to our website: www.fluke.com...
Safety Information General Safety Information is in the printed Users Manual that ships with the Product and at www.fluke.com. More specific safety information is listed where applicable. A Warning identifies hazardous conditions and procedures that are dangerous to the user.
Infrared Thermometer Directions for Use Directions for Use For the best results and to reduce errors, use proper measurement techniques: • Remember that skin temperature can be affected by: • Exercise • Hot or cold ambient temperature conditions. • Objects between the forehead and the thermometer during measurement •...
67 MAX Getting Started Manual Before Initial Use: Use a flat-head screwdriver to remove the battery door. Insert an AA battery and replace battery door. Make sure the screw is tight after the battery door is replaced. To Make a Measurement: Pull and hold the trigger for 2 seconds.