Page 2
LIMITED WARRANTY AND LIMITATION OF LIABILITY This Fluke product will be free from defects in material and workmanship for three years from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling.
Table of Contents Title Page Introduction ......................... 1 How to Contact Fluke ....................1 Safety Information ...................... 2 Maintenance ....................... 6 How to Change the Battery ..................6 How to Clean the Product ..................6 Specifications ......................7 Standards and Agency Approval ................9 The Product ........................
Introduction The Fluke 62 MAX and 62 MAX + Infrared Thermometers (the Product) can determine the surface temperature by measuring the amount of infrared energy radiated by the target’s surface. Note that the Japanese models indicate Celsius only. Warning Read all safety information before you use the Product.
62 MAX/62 MAX + Users Manual Safety Information A Warning identifies conditions and procedures that are dangerous to the user. A Caution identifies conditions and procedures that can cause damage to the Product or the equipment under test. Table 1 tells you about symbols used on the Product and in this manual.
Page 6
Replace the batteries when the low battery indicator shows to prevent incorrect measurements. • Do not use the Product around explosive gas, vapor, or in damp or wet environments. • Use the Product only as specified or hazardous laser radiation exposure can occur. Fluke-Direct .com info@Fluke-Direct.com 1.888.610.7664...
Page 7
62 MAX/62 MAX + Users Manual Table 1. Symbols Symbol Meaning Symbol Meaning This product complies with the WEEE Directive (2002/96/EC) marking requirements. The affixed label indicates that you must not discard this electrical/electronic product in domestic household waste. Product Category: With Risk of danger.
Page 8
Infrared Thermometer Safety Information Table 1. Symbols (cont.) Symbol Meaning Symbol Meaning Conforms to European Union Warning. Laser. directives. Conforms to relevant Australian Battery standards. Conforms to China Metrology Certification Fluke-Direct .com info@Fluke-Direct.com 1.888.610.7664...
62 MAX/62 MAX + Users Manual Maintenance Caution To avoid damage to the Product, do not leave the thermometer on or near objects of high temperature. How to Change the Battery To install or change the AA IEC LR06 battery, open the battery compartment and replace the battery as shown in Figure 16.
Infrared Thermometer Specifications Specifications 62 MAX 62 MAX + -30 °C to 500 °C -30 °C to 650 °C Temperature Range (-22 °F to 932 °F) (-22 °F to 1202 °F) ≥0 °C: ±1.5 °C or ±1.5 % of ≥0 °C: ±1 °C or ±1 % of...
Page 11
62 MAX/62 MAX + Users Manual 10:1 12:1 Optical Resolution (calculated at 90 % energy) (calculated at 90 % energy) 0.1 °C (0.2 °F) Display Resolution ±0.8 % of reading or ±1.0 °C ±0.5 % of reading or ±0.5 °C Repeatability (% of reading) (2 °F), whichever is greater...