Maintenance; Emptying The Dust Cup - Shark UltraLight POWERFINS HZ600 Series Owner's Manual

IMPORTANT: Unplug the vacuum before performing any maintenance.
Empty the dust cup each time you vacuum and periodically during cleaning, when debris in the dust cup
reaches the MAX fill line.
Press the Wand Release button and lift off
the handheld vacuum.
(Click)
Hold the dust cup over the trash. Press the
Empty button and pull open the dust cup lid
until it clicks and locks in the open position.
Gently tap the cone-shaped screen inside the
dust cup to knock dust and debris into the trash.

MAINTENANCE

EMPTYING THE DUST CUP

To remove the dust cup from the handheld
vacuum, press the two Dust Cup Release
buttons at the same time and slide out
the dust cup.
To reinstall, push the lid closed, then insert
the front end of the dust cup into the
handheld vacuum first, then the back end,
until it clicks into place.
s h a r kc l e a n . c o m