Valor 1500KN Installation Manual page 50

Installation
6. Place log L20 as shown, on top of the pilot shield.
L22
L21
L20
7. Place log L25 with the pin in the front platform.
8. Place log L26 as shown, from on top of log L25 to
the platform. Insert the pin into the hole closer to
the burner.
9. Place log L23 from the front platform to the top of
L26.
50
L25
L26
L25
L23
L26
L25
10. Place log L24 into the notch on top of L23.
11. Place log L28 as shown. There is a cutout that fi ts
over the right rear corner of the burner - the log
should be placed against the burner and then slid
1/4" toward the rear of the fi replace.
12. Place log L27 on top of log L28 to the front of the
platform.
13. Place (do not pour) embers among the logs.
Fuel Beds
L23
L24
L26
L25
L28
L28
L27