Valor 1500KN Installation Manual page 44

Installation
3. Place log L34 with the pin in the hole as shown. The
left end of the log should rest gently on the pilot
shield.
4. Place log L33 with the pin in the hole as shown.
L33
5. Place log L18 with the pin in the hole as shown,
across the burner to the rear side. The rear leg of
the log should just touch the burner.
L34
L33
44
L34
L34
L18
6. Place log L16 from the front side of the platform
onto the natural curve in log L18 as shown.
7. Place log L35 on the front of the platform as shown.
8. Place log L36 with the pin in the hole as shown.
9. Place pebbles as desired. The two smallest pebbles
can go directly on the burner.
10. Place remaining vermiculite around logs on the
platform.
Fuel Beds
L16
L18
L16
L18
L35
L36
L18