Valor 1500KN Installation Manual page 36

Installation
4. Thread the cable through the stud and the strain
refl ief in the fi replace case. Do not tighten the
clamp yet. Pull as much wire through the case as
you need to wire the receptacle outside the case.
5. Strip wire and terminate grounded receptacle using
wire nuts (not included). Place the connected
receptacle back in the fi replace, and pull excess
cable back through the strain relief.
6. Place the inner cover and receptacle in position and
replace 2 screws.
36
7. Leave your desired cable slack in the electrical box,
and tighten the strain relief cable clamp outside of
fi replace casing and secure and excess wire to
framing.
Electrical Wiring