Service Mode - Pandora Truck Manual

If the control of the preheater operation function is implemented, a voice message "Engine preheater
switched on" will play in the main voice menu for the entire duration of the preheater operation.
Online service PANDORA-ON.COM
For remote control of the engine preheater, login to the PANDORA-ON.COM, when the system is online
(there is an Internet connection) press the
If the control of the preheater operation function is implemented, the
the entire duration of the preheater operation.
Mobile application Pandora Connect
Open the mobile application. When the system is online (there is an Internet or Bluetooth connection),
press and hold the button on the control panel until the scale is fully loaded.
If the control of the preheater operation function is implemented, the
the entire duration of the preheater operation.
Automatic operation of the preheater
The mobile app settings allow to turn on and off the preheater before remote and automatic engine
start (except remote start by voltage). Automatic operation of the preheater is possible according to the
following parameters: switching on and off according to the engine temperature, operating time.
!
t
he pReheAteR sWItchING oN ANd off by tempeRAtuRe Is oNly possIble WheN the eNGINe tempeRAtuRe seNsoR Is coNNected

Service mode

It is recommended to put the system into the Service mode before handing it to a car service or valet
parking. When this mode is switched on, security system stops interfering with built-in electronics and
disables all security functions, remote and automatic engine starts for an ease maintenance.
To switch on Service mode, disarm the system, turn on the ignition, take the authorization
device in the radio coverage area (if the Immobiliser function is used), enter the «Immobiliser
PIN-code» (if the «Code immobiliser» function is used) and use one of the methods described
below:
Remote control
To activate/deactivate Service mode enter the main menu of the remote control, choose "Settings" ->
"Valet mode". (see "Remote control menu" section of the manual).
46
button on the control panel.
icon will be displayed for
icon will be displayed for
PA N D O R A T R U C K
Phone
Call the system number, wait for the answer:
• to activate Service mode, dial the
personal card;
• to deactivate Service mode, dial the
Mobile application Pandora Connect
To activate/deactivate Service mode, open the mobile application. When the system is online (there is
an Internet or Bluetooth connection), press and hold the
scale is fully loaded.
!
t
o chANGe buttoNs lAyout oR Add NeW buttoNs oN the coNtRol pANel
.
of the ApplIcAtIoN
Code immobiliser
To activate Service mode, enter the "Immobiliser PIN-code" and press the Code immobiliser button 10
times within 20 seconds.
To deactivate Service mode, turn on the ignition and enter the "Immobiliser PIN-code".
Automatic mode
The system can automatically deactivate Service mode when vehicle starts driving (speed increases)
.
and the owner authorization device (radio tag, Bluetooth remote control, watches or mobile device) is
in the radio coverage zone.
!
t
hIs fuNctIoN does Not RequIRe AddItIoNAl coNfIGuRAtIoNs
. .
loAdeR pANdoRAINfo com
Service mode indication
• Activated Service mode is indicated by: an icon
the ignition is on, long sound signal of a Beeper at the moment you activate the mode.
• Deactivated Service mode is indicated by: no
LED when the ignition is on, two long sound signal of a Beeper at the moment you deactivate the mode.
U S E R M A N UA L
command and the "Secret PIN-code" from the Owner's
command.
button on the control panel until the
,
Go to
. s
ee detAIled INfoRmAtIoN About
.
in the mobile application, constant green LED when
icon in the mobile application, no constant green
"s " -> "c "
ettINGs oNtRol buttoNs meNu
"s "
peed fuNctIoN oN
47