Related Manuals for Team Corally RADIX XP 4S
Summary of Contents for Team Corally RADIX XP 4S
- Page 1 Download the latest version of the manual as well as other languages from www.corally.com. Revised : 2021-03-08 C-00186_Manual...
-
Page 2: Read First
INTRODUCTION Thank you for purchasing a Team Corally car. This manual describes the instructions for using the model and the elec- tronic components. You will also find some tips on how to maintain your RC model so that you can enjoy it for years to come. -
Page 3: Use Precautions
Take all necessary precautions before, during and after using your model. You are responsible for the safe as- sembly, maintenance and use of your model. In case of any questions, contact your local reseller or contact Team Corally support for assistance. SAFETY PRECAUTIONS For your safety, always use wear gloves and goggles when assembling and maintaining your model. -
Page 4: Warranty
If material defects or manufacturing faults should arise in a product distributed or manufactured by Team Corally / JSP Group Intl bvba, and purchased by a consumer, we Team Corally / JSP Group Intl bvba acknowl- edge the obligation to correct those faults or defects within the limitations described below. This manufacturers warranty is in addition to, and does not affect, the legal or contractual rights of the consumer which arise from the purchase of such products. - Page 5 LIPO BATTERY SAFETY PRECAUTIONS • Follow and respect the manufacturer’s instructions for use • It is important to check that your ESC is set to LIPO if you are using a LIPO battery. Failure to comply with this instruc- tion will result in increased battery discharge and may cause fire and damage to persons and property. •...
-
Page 6: Car Components
CAR COMPONENTS Front Differential Front Shock Absorber Suspension Arm Anti-Roll Bar Steering Block Steering Link Battery compartment Steering Servo Receiver Box Centre Differential Brushless Motor Speed Controller (ESC) Power Switch Rear Suspension Arm Anti-Roll Bar Wheel Axle Rear Upright Camber Link Rear Shock Absorber Rear Differential... - Page 7 QUICK START GUIDE READ THE INSTRUCTIONS CHARGE THE BATTERY INSTALL 4x AA BATTERY CHARGER BATTERY MAKE SURE THAT ALL SCREWS AND NUTS ARE INSTALL THE BATTERY TURN ON THE TRANSMITTER (Always First) TIGHTENED PROPERLY. CONNECT THE BATTERY TO THE ESC CHECK THE FUNCTIONS CHECK THE RADIO SYSTEM RANGE SWITCH ON THE ESC...
- Page 8 BASIC CAR SETTINGS Possible setting with the optional parts : FRONT TOE C-00180-039 Steering Ball Cups - Composite C-00180-128 Turnbuckle - M4 - 50mm TOE-OUT TOE-OUT -1° -1° 31mm Adjust the angle by screwing the TURNBUCKLE. Possible setting with the options : FRONT CAMBER REAR CAMBER C-00180-130 Turnbuckle - M5 - 50mm...
-
Page 9: Ride Height
BASIC CAR SETTINGS SUSPENSION TRAVEL It is important to properly adjust the travel of the suspension arm to prevent the shock absorber from reaching the end of its travel and damaging it. • Place the chassis on a block in order to release the suspension to the maximum. •... - Page 10 SHOCK ABSORBER MAINTENANCE It may be necessary to replace the silicone oil in the shock absorbers every 40 runs. It depends on how you drive and the type of terrain you drive on. Remove the shock absorbers from the car. (4x) Remove the shock cap.
- Page 11 SHOCK ABSORBER - EXPLODED VIEW Do not overtighten the Shock Cap to C-00180-080 Shock Piston prevent deformation of the silicone Shock Bladder. C-00180-133 Set content C-00180-189 Shock Piston - 4x1.6 Shock Piston - 4x1.8 C-31001-25 Shock Piston - 5x1.4 C-00180-080 Shock Piston - 5x1.5 Shock Piston - 5x1.6 C-00180-190...
-
Page 12: Differential Maintenance
DIFFERENTIAL MAINTENANCE It may be necessary to replace the silicone oil every 50 runs. It depends on how you drive and the type of terrain you drive on. • 1. Remove 2 screws under the chassis. • 2. Remove the 2 shock absorbers fixing screws. Rotate the shock absorbers upwards •... - Page 13 FRONT & REAR DIFFERENTIAL - EXPLODED VIEW C-3002-30-12 (4pcs) C-00180-153-2 C-00180-205 C-3611-3-08-16-05 C-00180-179 (set) C-00180-182 C-00180-184 C-00180-688 C-00180-205 C-00180-183 C-00180-182 C-3611-3-08-16-05 C-00180-153-2 C-00180-098 CENTRE DIFFERENTIAL - EXPLODED VIEW C-3002-30-10 (4pcs) C-00180-154-2 C-00180-205 C-3611-4-08-16-05 C-00180-179 (set) C-00180-182 C-00180-684 C-00180-205 C-00180-091 C-00180-183-1 C-00180-182 C-3611-4-08-16-05 C-00180-154-2...
-
Page 14: Gear Ratio
GEAR RATIO MOTOR PINION MOD1.0 High-performance 13T tooth pinion gear, manufactured from special steel for toughness and durability with precise tolerances and assures unparalleled concentricity. Created on a special gear machine, all pinions feature ultra-precise tooth shaping and ultra-true running for vibration-free operation. - Page 15 FRONT DRIVE TRAIN - EXPLODED VIEW C-00180-117 C-00180-009 DIN913 C-00180-123 M4x4 C-00180-122 C-00180-009 C-00180-329 C-00180-123 C-3611-4-08-16-05 (x2) C-3101-30 C-00180-009 M3x16 M3x10 C-00180-207 C-00180-150 C-00180-555 C-00180-011 C-00180-360 C-00180-150 C-00180-193 C-3003-30-16 C-00180-149 C-00180-089 C-00180-012 (x2) C-3003-30-20 C-00180-051 C-00180-240 M4x10 C-00180-055 (set) DIN913 M5x4 C-3611-4-08-16-05 (x2) C-00180-155-2 C-3101-30 (x4)
- Page 16 REAR DRIVE TRAIN - EXPLODED VIEW M3x14 C-00180-226-B C-00180-005 C-3002-30-12 (x2) Nylstop Nut•M3 C-00180-535 C-3003-30-20 C-00180-005-2 C-00180-005-2 C-31205 (x5) C-3003-30-12 (x2) C-3101-40 (4) C-3101-30 C-3101-30 C-00180-005 C-00180-030 C-3003-30-14 C-3101-30 C-00180-148 C-3003-30-25 C-00180-030 DIN913•M4x4 C-00180-122 C-00180-055 C-00180-132 C-00180-329 C-00180-293 C-00180-148 C-3101-40 C-00180-021 C-00180-008 C-00180-556...
-
Page 17: Chassis - Exploded View
CHASSIS - EXPLODED VIEW KURON 725 C-54054 C-3001-40-12 C-3003-30-10 C-00180-023 C-00180-177 C-3003-30-30 C-3004-40-04 M3x8 C-3003-30-12 C-3001-40-10 C-00180-372 C-3003-30-10 C-00180-171 C-3001-40-08 (x2) C-72713 C-52022 C-3003-30-18 C-3002-30-06 C-00180-129 C-00180-176 C-00180-604 C-00180-044 (x2) TOROX 135 C-54012 C-3003-30-12 (x4) C-00180-149 C-00180-018 C-00180-024 C-00180-013 C-3104-40 C-3101-40 C-3003-30-10 C-3003-30-08 (x2) -
Page 18: Spare Parts
SPARE PARTS C-00180-004-1 C-00180-005-2 C-00180-008 C-00180-009 C-00180-615 Battery Strap - Hook & Loop Wing Mount - Adjustable - Hub - Rear - Composite - 1 pc Steering Block - Pillow Ball Cup Battery Tray - Large - Compos- - 2 pcs Composite - 1 Set (2) - Front - Composite - 1 set ite - 1 Pc... - Page 19 SPARE PARTS C-00180-109 C-00180-117 C-00180-122 C-00180-123 C-00180-127 Caster Clips Set - 1 to 4.5mm Pivot Ball Adjusting Nut - Alu- Pin 2.5x17mm - Steel - 10 pcs Pivot Ball - Steel - 4 pcs Hinge Pin - Outer - Steel - 2 pcs - 1 Set minium - 4 pcs C-00180-129...
- Page 20 SPARE PARTS C-00180-188 C-00180-189 C-00180-190 C-00180-191 C-00180-192 O-Ring - Silicone - 4x8mm - Shock Bladders - Silicone - Shock Washer - 2.5x6x0.5mm - O-Ring - Silicone - 9x12mm O-Ring - Silicone - 5 pcs 4 pcs Steel - 10 pcs - 5 pcs 16.2x19.8mm - 5 pcs C-00180-194...
- Page 21 SPARE PARTS C-00180-556 C-00185-375-2 C-00180-611 C-00180-684 C-52021-1 Varioprop - Digital Servo - Low Camber Links Rear - Buggy - Radix4 - Painted Body - Buggy Racing Tires Glued on Rims - Gear Diff. Pin 3.5 x 29.8mm - Voltage - Core Motor - Metal Composite - 2 pcs - 1 pc 2 pcs...
-
Page 22: Option Parts
OPTION PARTS C-00180-224 C-00180-039 C-00180-041 C-00180-128 C-00180-130 Fan Holder - Composite - 1 set Steering Ball Cups - Composite Rear Camber Ball Cups - Outer Turnbuckle - M4 - 50mm - Turnbuckle - M5 - 50mm - - 1 set - Inner - 1 set Steel - 2 pcs Steel - 2 pcs... - Page 23 STEEL SCREWS LENGTH LENGTH LENGTH LENGTH HEX FLAT HEAD SCREWS HEX BUTTON HEAD SCREWS HEX SOCKET HEAD SCREWS HEX SET SCREWS DIN 7991 - STEEL - 10 PCS DIN 7380 - STEEL - 10 PCS DIN 912 - STEEL - 10 PCS DIN 916 - STEEL - 10 PCS NOMINAL LENGTH...
-
Page 24: Ball Bearings
NUTS NYLSTOP NUT NYLSTOP NUT - FLANGED NYLSTOP NUT LOW PROFILE NUT ALUMINIUM - 10 PCS ALUMINIUM - 10 PCS STEEL - 10 PCS DIN 936 - STEEL - 10 PCS NOMINAL NOMINAL NOMINAL NOMINAL COLOR COLOR COLOR COLOR SIZE SIZE SIZE SIZE... - Page 25 ALUMINIUM WASHERS WASHER FOR SOCKET HEAD SCREW WASHER FOR BUTTON HEAD SCREW WASHER FOR FLAT HEAD SCREW ALUMINIUM - 10 PCS ALUMINIUM - 10 PCS ALUMINIUM - 10 PCS FOR S/H FOR B/H FOR F/H COLOR COLOR COLOR SCREW SCREW SCREW Gold C-3214-20-0...
-
Page 26: Declaration Of Conformity
La présente déclaration est établie sous la seule responsabilité du fabricant. Product(s)/Produkt(e)/ Produit(s) : RADIX XP 4S - BUGGY 4WD - 1/8 -RTR The object of declaration described above is in conformity with the relevant Union harmonization Legislation, specifically the requirements of the specifications listed below, following the provisions of the European RED Directive 2014/53/EU: Der Gegenstand dieser Erklärung ist konform mit den Harmonisierungsrechtsvorschriften der Europäischen Union, insbesondere... - Page 28 WWW.CORALLY.COM Team Corally is a registered trademark licensed to JSP Group Intl bvba Geelseweg 80 B-2250 OLEN Belgium • • • Tel: +32 14 25 92 94 info@corally.com • C-00186-M-EN...