Cornelius ABS 2.0 Maintenance Manual page 2

Clean and sanitize conveyor assembly, drip tray and nozzle parts (continued)
Clean the Drip Tray.
8
Make sure the water
deflector is properly
installed; this will help
prevent motor
failures. (Order
replacement if the
deflector is missing).
Check and flush the
9
drain.
Pour warm water
down the drip-tray
drain. Flush the drip-
tray using carbonated
water.
Wash the drip-tray
10
area, splash panel
and clean any spills
from the machine
exterior using McD
HA detergent with a
clean cloth.
Clean the splash
11
panels.
Wipe down drip-tray
and splash panel with
a clean cloth to
remove any soapy
residue.
Wipe down drip-tray
12
and splash panel with
a clean cloth to
remove any soapy
residue.
Spray McD sanitizer
all around drip-tray
and splash panel. Let
air dry for 5 minutes.
Back Room
13
Cleaning.
Collect grill,
conveyor, and all
nozzle components
and bring to back
room.
Nozzle Cleaning.
14
Remove the gasket
from the diffuser.
Prepare a bucket of
15
McD HA Detergent
solution.
Cleaning the Nozzle
16
Parts.
Place outer nozzle
housing, diffuser, and
gasket in the soap
solution.
Let soak for a few
minutes.
©McDonald's Corporation · Planned Maintenance Manual
Page 2 of 4