Yamaha Portable Grand DGX-630 Service Manual page 54

DGX-630/YPG-635
Loading Files from a USB Flash Memory
User files as well as Style, Song, and Music Database files residing on a USB flash memory can be loaded
into the instrument.
CAUTION
• If you load a User File registration memory data will be overwritten
by the newly loaded data. Save important data to a USB flash
memory before loading data that will overwrite it.
1
With the USB flash memory containing the file
you want to load connected to the USB TO
DEVICE connector, check that the File Control
icon is shown in the MAIN display.
2
Press the FILE CONTROL [MENU] button.
3
Use the CATEGORY [ ] and [ ] buttons to
locate the Load item.
54
4 Use the dial to select the file you want to load.
All user files in the USB flash memory will be
displayed first, followed by the style files, song files
and music database files.
Files must be located in the "User Files" folder in
the USB flash memory. Files located outside of that
folder will not be recognized.
5
Press the [EXECUTE] button. The display
prompts you for confirmation.
You can cancel the load operation at this point by
pressing the [-] button.
6
Press the [EXECUTE] button again, or the [+]
button, and the load operation will begin.
CAUTION
• Once the load-in-progress message appears on the display
the operation cannot be canceled. Never turn off the power
or remove the USB flash memory during this operation.
7
A message will appear on the display to
inform you that the operation has finished.
Press the [EXIT] button to return to the MAIN
display.