Yamaha Portable Grand DGX-630 Service Manual page 52

DGX-630/YPG-635
Saving User Files (Registration Memory) to USB Flash Memory
This operation saves a "User File" containing the registration memory data to a USB flash memory device.
The User File name will have a ".usr" extension which will not appear in the instrument's display.
1
Make sure that a properly formatted USB flash
memory has been properly connected to the
instrument's USB TO DEVICE terminal, and
that the icon is showing in the MAIN display.
2
Press the FILE CONTROL [MENU] button.
3
Use the CATEGORY [ ] and [ ] buttons to
locate the Regist Save item.
A default file name will automatically be created.
•
To Overwrite an Existing File
If you want to overwrite a file that already exists
on the USB flash memory, use the dial or the
[+] and [-] buttons to select the file, then skip
ahead to step 6.
NOTE
• Up to 100 user files can be saved to a single USB flash memory.
• If the USB flash memory has been write-protected, an appropriate
message will appear on the display and you will not be able to exe-
cute the operation.
• If there is not enough capacity left on the USB flash memory to save
the data an appropriate message will appear on the display and you
will not be able to save the data. Erase unwanted files from the USB
flash memory to make more memory available, or use a different
USB flash memory.
4
Press the [EXECUTE] button. A cursor will
appear below the first character in the file
name.
5
Change the file name as necessary.
• The [-] button moves the cursor to the left, and the
[0] button moves it to the right.
• Use the dial to select a character for the current
cursor location.
• The [+] button deletes the character at the cursor
location.
52
Cursor left Delete character
Cursor right
Cursor
6
Press the [EXECUTE] button. The display
prompts you for confirmation.
You can cancel the save operation at this point by
pressing the [-] button.
7
Press the [EXECUTE] button again, or the [+]
button, and the save operation will begin.
The user song will be stored to the USER FILE
folder in the USB flash memory.
CAUTION
• Once the save-in-progress message appears on the display the
operation cannot be canceled. Never turn off the power or
remove the USB flash memory during this operation.
8
A message will appear on the display to inform
you that the operation has finished.
Press the [EXIT] button to return to the MAIN
display.
NOTE
• If an existing filename is specified the display prompts you for confir-
mation. Press [EXECUTE] or [+] if it is OK to overwrite the file, or [-]
to cancel.
• The amount of time it will take to perform the save operation will
depend on the condition of the USB flash memory.
The dial selects
characters