Basic Operation; Video Mode - Kenwood DRV-A301W Instruction Manual

Basic Operation

-Video Mode

The following information will help you better understand the icons in VIDEO MODE and
their relative functions. Some icons show up only when corresponding
functions are activated.
1. Mode: Indicates the device is in video mode.
2. Resolution: Displays the current resolution.
3. G Sensor: The current sensitivity level of G-Sensor.
4. Video Length: The duration of each video clip.
Exposure: Indicates the current exposure level settings.
5.
6. GPS: If this icon flashes, it indicates the device is locating GPS signal.
When the GPS signal is found, the icon will stop flashing and remain stable on the screen.
7. Recording Duration: This will indicate the length of the current recording.
8. Parking Mode Sensor: Indicates the parking mode sensor is on.
File Protection: Indicates the current video clip is protected.
9.
10. Date: Displays current date.
11. Time: Displays current time.
12. Microphone: When the audio recording function is off, there will be a red line across
the icon.
Power Status: Indicates if the device is charging or not.
13.
The device's default settings have been set for you to use the device without needing
to change the settings.
If you need to make adjustments to the settings, the following instructions will help you.
1 2 3 4
FHD
1080P
13 12
5 6 7
00:59
11:17:01 02/13/2019
11 10
19
8
9