In-Vehicle Installation - Kenwood DRV-A301W Instruction Manual

In-Vehicle Installation
1. Insert microSD Card Into The Dash Cam
The dash cam supports class 10 or above microSD card with 8GB to 256GB capacity.
Follow the symbol as directed to insert the SD card.
Do not remove or insert the memory card while the device is turned on.
The microSD card is inserted as factory shipment condition.
2. Connect The Dash Cam To The Magnetic Mount
Make sure you align the camera within the connector port for proper installation.
3. Attach The Mount To The Windshield
Select a location on the whindshield within wiping range where won't distract you. Then, put the suction
mount in place and lock the mount.
4. Connect To Car Power Outlet
Connect the cigar lighter adapter cable that is in the package to your vehicle's 12 V outlet.
The vehicles ignition will let the camera turn on and record while connected to your vehicles 12 Voutlet.
When the vehicle is turned off, the camera will automatically shut down.
5. The First-Time Setup
When connecting the power, the dash cam will turn on and display the first-time setup. Please set your
language, country, time zone, time and date etc.
6. First Time Use SD Card Format
When the SD card is inserted into the device for the first time, the device will ask you to format the card.
7. Start Recording Automatically
After formatting the card, the dash cam will start recording and you are all set.