Menu; Menu (Menu Items And Details) - Hitachi PSC-A32MN Operation Manual

8. Menu

The table below shows menu item and its function.
Item
Filter Sign Reset
Schedule Setting
Schedule Timer
Setting
Holiday Setting
Schedule Timer
ON/OFF Setting
Adjusting Setting
Temperature Range of
Remote Control
Date and Time Settings This function is used for adjusting date and time.
Display of Screen for
Cleaning
Touchscreen
Calibration
Group Name Register
Screen Display Setting
Brightness
Language Setting
Temperature Unit
Accumulated
Operation Time
Contact Information
Summer Time Setting
20
This function is used for turning off the filter sign of the connected indoor units.
Regardless the occurrence or not of the Filter Sign, it is possible to reset the
Filter Sign time display of the Air Conditioner Unit.
This function is used to Run/Stop the operation of the Air Conditioner at a
desired time.
This function is used for setting the time (by the minute), "Run/Stop" and
o
temperature (19~30 C).
For weekly schedule setting, up to 10 schedule items can be set per day.
It is also available to copy the setting contents.
This function is used for suspending the schedule operation temporarily.
The schedule operation will be suspended when the day is set as Holiday.
This function is used for setting irregular holidays such as national holidays.
"Schedule Timer OFF Setting" is used for suspending the schedule operation
for the target group.
The schedule operation will not be available when Schedule Timer is OFF.
This function is used for a long holiday, sudden holidays, national holidays,
etc.
This function is used for adjusting the setting temperature range. It is possible
to set Cooling minimum temperature or Heating maximum temperature.
This function is used for cleaning LCD (liquid crystal display) of central station.
The screen will return to "Menu" after 10 seconds of not being tapped.
This function is used for calibrating the tap position for touchscreen.
This function is used if the operation is not carried out smoothly when the
button on the touchscreen is tapped.
This function is used for registering name of the block and group.
The registrable number of character is a maximum of 16 characters for the
name of each block or group. It is also available to copy the name.
If the group/block is registered without name, it will be registered as "Group 1"
or "Block 1" automatically.
This function is used for setting the screen display.
This function is used for adjusting the brightness of the touchscreen display.
This function is used for changing the displayed language.
This function is used for changing the temperature unit.
This function is used for indicating the accumulated operation time of the air
conditioner.
• The accumulated operation time value will be indicated by month.
• The operation time is indicated for 16 months, including the current month.
• "Thermo ON Time" can be indicated by setting the controller option.
This function is used for indicating the service contact address and the latest
alarm code.
This function is used for setting the summer time operation.
Function Page
22
24
24
31
32
33
34
34
35
36
38
38
39
40
41
43
43
P5415644