Kohler BOTTICELLI 2393-WH Installation Manual page 4

Bottom Edge
of Spout
1"
(2.5 cm)
Min
K-2333 and K-2393 Only
2. Install the Faucet and Studs
CAUTION: Risk of product damage. Do not use plumbers
putty with your marble lavatory. Plumbers putty can cause
permanent discoloration of marble surfaces.
For wall-mounted faucets: Ensure the faucet spout has a
minimum of 1" (2.5 cm) clearance over the rim of the lavatory.
Install the faucet according to the manufacturer's instructions.
Measure and mark each of the four threaded studs 1/2" (1.3 cm)
from one end.
Thread the marked end of the studs into the inserts in the bottom
of the lavatory. Do not thread the studs past the mark.
1096633-2-A
Stud
Mark here.
4
1/2"
(1.3 cm)
Kohler Co.