Kohler HYDRO-TOWER 200 Series Installation Instructions Manual
Kohler HYDRO-TOWER 200 Series Installation Instructions Manual

Kohler HYDRO-TOWER 200 Series Installation Instructions Manual

Hide thumbs Also See for HYDRO-TOWER 200 Series:

Advertisement

BEFORE YOU BEGIN
!
Read installation guide in illustration and word file carefully, and install the tank according to instructions in the guide to avoid
product damage and installation inconvenience caused by inappropriate operation.
!
All data contained is based upon the last product information available at the time of publication. Kohler Company reserves
the right to implement changes of product characteristics, packaging and availability at any time without further notice.
!
Do not apply erosive cleanser and solvent in the tank, which will damage tank spares and result in leakage in the tank.
Kohler will not be responsible for any damage related to above mentioned cleanser or solvent. Mild detergent can be used.
!
Do not apply spares that are not provided by Kohler, and please note that glass adhesive tape shall not be applied to the
installation of Kohler spares. Kohler will not be responsible for any damage related to installation with spares not provided by
Kohler.
This product complies with GB26730-2011.
!
!
!
!
!
GB26730-2011
!
Ordering Information
HYDRO-TOWER 200 PNE IWT 2.6/4L ....................................................................................................................K-20006T-PNE
HYDRO-TOWER 200 PNE IWT 2.6/4L.....................................................................................................................K -20006K-PNE
HYDRO-TOWER 200 PNE IWT 3/4.5L ....................................................................................................................K-20007T-PNE
HYDRO-TOWER 200 PNE IWT 3/4.5L ....................................................................................................................K-20007K-PNE
HYDRO-TOWER 200 PNE IWT 3/6L .......................................................................................................................K-20008T-PNE
HYDRO-TOWER 200 PNE IWT 3/6L .......................................................................................................................K-20008K-PNE
HYDRO-TOWER 200 PNE IWT W/O FRAME 2.6/4L ..............................................................................................K-78073T-PNE
HYDRO-TOWER 200 PNE IWT W/O FRAME 2.6/4L...............................................................................................K -78073K-PNE
HYDRO-TOWER 200 PNE IWT W/O FRAME 3/4.5L ..............................................................................................K-78074T-PNE
HYDRO-TOWER 200 PNE IWT W/O FRAME 3/4.5L ..............................................................................................K-78074K-PNE
HYDRO-TOWER 200 PNE IWT W/O FRAME 3/6L .................................................................................................K-78075T-PNE
HYDRO-TOWER 200 PNE IWT W/O FRAME 3/6L .................................................................................................K-78075K-PNE
PEBBLE Pneumatic In-Wall Tank Faceplate (For Separate Purchase)...................................................................K-20341T-PNE
200
200
200
200
200
200
200
200
200
200
200
200
(
KOHLER CHINA INVESTMENT CO., LTD
1288818-T01-A
,2.6/4L ......................................................................................................................K-20006T-PNE
,2.6/4L ......................................................................................................................K-20006K-PNE
,3/4.5L ......................................................................................................................K-20007T-PNE
,3/4.5L ......................................................................................................................K-20007K-PNE
,3/6L .........................................................................................................................K-20008T-PNE
,3/6L .........................................................................................................................K-20008K-PNE
,2.6/4L(
) ..............................................................................................K-78073T-PNE
,2.6/4L(
) ..............................................................................................K-78073K-PNE
,3/4.5L(
) ..............................................................................................K-78074T-PNE
,3/4.5L(
) ..............................................................................................K-78074K-PNE
,3/6L(
)..................................................................................................K -78075T-PNE
,3/6L(
) .................................................................................................K-78075K-PNE
)(
)........................................................................................................................K -20341T-PNE
JING'AN DISTRICT, SHANGHAI, PRC
(
)
HYDRO-TOWER 200
K-20006T-PNE/K-20006K-PNE/K-20007T-PNE/K-20007K-PNE
K-20008T-PNE/K-20008K-PNE/K-78073T-PNE/K-78073K-PNE
K-78074T-PNE/K-78074K-PNE/K-78075T-PNE/K-78075K-PNE
NO.158, JIANG CHANG SAN ROAD,
POST CODE: 200436
© Copyright Kohler China Investment Co., Ltd. 2016
-1-
©
INSTALLATION INSTRUCTIONS
IN-WALL TANK
K-20341T-PNE
158
200436
200
201

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HYDRO-TOWER 200 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Kohler HYDRO-TOWER 200 Series

  • Page 1 Kohler will not be responsible for any damage related to above mentioned cleanser or solvent. Mild detergent can be used. Do not apply spares that are not provided by Kohler, and please note that glass adhesive tape shall not be applied to the installation of Kohler spares.
  • Page 2: Function Explanation

    Function Explanation Anti flow-backwards Adjustment of inlet water level Adjustment of flushing volume Single/double gear flushing Assemble, disassemble and maintenance can be done without tools. Design And Installation Concept Of In-wall Tank Installation of in-wall tank is much easier and nice-looking comparative to that of traditional tank. Meanwhile, the space layout will be more reasonable due to the application of in-wall tank pipes and connectors.
  • Page 3: Specifications

    SPECIFICATIONS K-20008T-PNE Fullflushingvolume:6L K-20008K-PNE Halfflushingvolume:3L K-78075T-PNE K-78075K-PNE K-20007T-PNE Fullflushingvolume:4.5L K-20007K-PNE Halfflushingvolume:3L K-78074T-PNE 4.5L K-78074K-PNE K-20006T-PNE Fullflushingvolume:4L K-20006K-PNE Halfflushingvolume:2.6L K-78073T-PNE Literperflushing K-78073K-PNE 2.6L Temperature Environmentaltemperature:1°C~55°C, Watertemperature:1°C~45°C 1°C~55°C 1°C~45°C RECOMMENDES TOOLS AND MATERIALS Open end/adjustable wrenches Allen wrench Knife File Hacksaw Masonry Level Screw driver Insulation tape...
  • Page 4 ROUGHING-IN UNIT: mm Reference Value K-20006T-PNE/K-20006K-PNE/K-20007T-PNE/K-20007K-PNE/K-20008T-PNE/K-20008K-PNE Installed with K-20341T-PNE K-20341T-PNE Method three: Method one: Method two: Remote installation Press from top Remote plate installation of mask Suggested faceplate Suggested faceplate installation area installation area Air hose 150~185 R1000mm R1000mm Pinch plate Air hose Air hose...
  • Page 5 Drain outlet 110mm 110mm Tank Bracket Water Tank Drainage Pipe Bracket Discharge Fixing Frame Elbow Knob Bottom of the Drainage Pipe Drainage Hole Drain outlet 110mm, welding 110mm Kohler reserves the right to change marked dimensions without prior notice. 1288818-T01-A...
  • Page 6: Installation

    INSTALLATION Way of Installation There are two ways to install this product: in-wall tank with frame & in-wall tank without frame In-wall Tank With Frame In-wall Tank Without Frame Cover,Top Cover,Front Installation For In-wall Tank With Frame A. Installation of In-wall Tank 1.
  • Page 7 3. Drill four holes with diameter of 10mm and depth of 80mm with churn drilling as shown, and fill in the holes with bulge Bulge Screw screw and tighten the screw. 10mm 80mm Gasket Bulge Screw Cap/Bolt 4. Tighten the hexagonal long screw with medium Allen key Hexagonal Screw as shown in illustration A.
  • Page 8 B. Floor Discharge Installation Method Water Tank Bracket Discharge 1. There are three methods (A, B and C) for drainage pipe Elbow installation. Loosen the knob "open" on the fixing frame, put the drainage pipe into the fixing frame, then adjust and tighten the knob "lock".
  • Page 9 Method one: Method two: 4. Access Panel Installation Methods: Press from top Remote plate installation There are four ways to install access panel: Method one: Press from top Method two: Remote plate installation: fix four plates with Suggested faceplate Pinch installation area screws plate...
  • Page 10 6. Methods two and three: During remote installation, fix the Cover,Top cover onto the tank and pull the air hose to the panel. Cover,Front Reserve access panel at front or top to ensure removal and installation of cover. Fix Mask Onto Wall Air hose Finished wall...
  • Page 11: Installation Of Toilet

    C. Installation of P-trap 110mm into 1. Insert drainage pipe with inner diameter Water Tank Bracket drain elbow and weld. 110mm Drainage Pipe 2. Tighten the long screw into the holes of the tank bracket Small Cap and cover the drainage hole with the big cap, cover the Water Inlet inlet hole with the small cap.
  • Page 12 Inlet Pipe 2. Eliminate unwanted part of the inlet pipe according to the marks of reserved space ,and rasp a smooth surface with files. Reserved Space Drainage Pipe 3. Install the big and small leak-proof gaskets on inlet pipe and outlet pipe ,then install it to corresponding pipes on the toilet tank.
  • Page 13: Faceplate Installation

    6. Install the reserved lock, gasket, hexagonal nut and decoration cap onto long screw according to the order shown in the illustration. Note: Please refer to the installation instructions of toilet. Long Screw Reversed Lock Gasket Hexagonal Nut Decoration Cap Supporting Board E.
  • Page 14 4. It is ready to use when connected to water supply after installation. Note: Reserve access panel at front or top of the tank in Full Flush remote installation. Button Half Flush Button Installation For In-wall Tank Without Frame Cover,Top Cover,Front A.
  • Page 15 3. Put the tank onto the fixing bracket as shown in the right figure and adjust the tank to level . Then tighten screws Level with hex-head key. Tank Note: it is a must to keep the tank level. Loosen Tighten Medium Allen Key...
  • Page 16 7. Method one: Install mask when pressing from top Cover,Top Mask 1) Remove top plate, then install the mask on the top of the tank, and tighten the screw to fix the mask to the tank. Screw 2) Cut apart the cable of the air hose and pull it out from the rectangle cover.
  • Page 17 9. Method four: Cut apart the cable of the air hose. Pull it out Method four: Press from front from the front of the tank and meanwhile reserve the access panel. Fix the four plates with screws and then fix Finished wall the support board.
  • Page 18 Mask 11. When finishing the brickwork, eliminate unwanted part of the mask, the drainage pipe and the inlet pipe, if there is mask. Inlet Pipe Drainage Pipe 12. Fix faceplate according to step E and then it is ready for use.
  • Page 19 2. Pay special attention when dismantle supporting board 4 lock nuts, all bolts shall align with "OPEN" mark. OPEN Supporting Board 3. Dismantle supporting board as shown. Locknut 4. Open/close water supply Rotate valve switch to open/close water supply as shown. Close Open Valve...
  • Page 20 6. Push aside the snap of the toilet detergent box to take the box out. Snap 7. Push aside the pivot snaps of the big flush and small flush Snap (Locked) towards upper right to make the lever and pivot apart. Hold bracket top by hand and then lift up to unlock the bracket.
  • Page 21 10. Remove discharge valve as shown and then take valve out for cleaning or adjusting. Outlet Valve Outlet Valve Press for Top Wash Filtration Net Close corner valve first, then loosen and take out the tighten nut, and wash the waste on filtration net with clean water. Then reset the tighten nut to the original position.
  • Page 22: Troubleshooting Procedures

    C. Adjust Inlet Valve Inlet Valve Hoist and reduce the water level in the tank by adjusting Control Pole the control pole. Turn the control pole counterclockwise to lower down the floating box and reduce the water level of the tank .turn the control pole clockwise to hoist the floating box and increase the water level in the tank.
  • Page 23 1288818-T01-A -23-...

Table of Contents