Advertisement
Quick Links
SERVICE PARTS
23472T-4
Single Handle Lavatory Faucet
23475T-4
Tall Single Handle Lavatory Faucet
23478T-4
Super Tall Single Handle Lavatory Faucet
1331657**
1331656**
833438
1331655
1343774
1343773
3012353
1310075
1343771
1239175
1231664
1231664
834704
**Color code must be specified when ordering.
NOTE: For all Asia pacific regions (excluding China) add SP (SPxxxxxxx**) in front of the part number when ordering.
1331663-2A-A
PARALLEL
1331372**
1331371**
3008523
1080817
1132027**
880406
1132031
1132022
1132034
1331350**
1331357
1030925
1132033
1331661**
1231664
3006148
1146748
1331351
1228834
INSTALLATION INSTRUCTIONS
23472T-4
23475T-4
23478T-4
BEFORE YOU BEGIN
All information is based on the latest product information available at the time of publication. Kohler Co. reserves
the right to make changes in product characteristics, packaging, or availability at any time without notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. Flush the water supply pipes thoroughly to remove debris.
2. If possible, install this faucet before installing the lavatory.
3. Inspect the supply tubing for damage and leakage. Replace and maintain as necessary.
4. Observe local plumbing codes.
5. Shut off the water supplies to the fitting.
HANDLE OPERATION
Lift handle gently. Turn clockwise for hot water, turn counter-clockwise for cold water.
STANDARD APPLICABLE
Special model meets or exceeds the following at date of manufacture: TIS
ROUGH-IN DIMENSIONS
60 MIN
47
4
1331663-2A-A
Single Handle Lavatory Faucet
Tall Single Handle Lavatory Faucet
Super Tall Single Handle Lavatory Faucet
47
155
136
15.2º
Ø50
Ø32~Ø38
G1/2˝
23475T-4
PARALLEL
60 MIN
155
136
15.2º
Ø50
Ø32~Ø38
G1/2˝
23478T-4
1
Advertisement
Related Manuals for Kohler 23472T-4
Summary of Contents for Kohler 23472T-4
- Page 1 BEFORE YOU BEGIN 1331657** 1331372** All information is based on the latest product information available at the time of publication. Kohler Co. reserves 1331371** 3008523 the right to make changes in product characteristics, packaging, or availability at any time without notice.
- Page 2 Remove stopper(9), flange(10) and washer(11) from drain body(13). Insert drain body through the drain hole from underside, and adjust the Do not use abrasive cleaners or solvents on Kohler faucets and fittings. position properly. Screw the flange(10) with washer(11) onto the drain body.