Kohler 23776T-7 Installation Instructions

Download this manual

DTV MODE

INSTALLATION INSTRUCTIONS

23776T-7

Bath Filler UI

BEFORE YOU BEGIN

All information is based on the latest product information available at the time of publication. Kohler Co. reserves

the right to make changes in product characteristics, packaging, or availability at any time without notice.

Please leave these instructions for the consumer. They contain important information.

NOTES:

1. Observe

all plumbing, electrical, and building codes.

2. Isolate the electrical and water supplies before commencing installation.

3. DO NOT modify or extend the cables supplied with the product.

4. When possible, install the valve prior to installing the interface.

5. Ambient Temperature: 1°C - 40°C; Maximum Relative Humidity: 95% non-condensing; Supply Voltage: 12

Vdc SELV(Safety Extra-Low Voltage ) 2W max.

ROUGH-IN DIMENSIONS

Ø64

Ø3.5

Ø35

25.3

1388387-2A-A

Page 1 Bath Filler UI BEFORE YOU BEGIN All information is based on the latest product information available at the time of publication. Kohler Co. reserves the right to make changes in product characteristics, packaging, or availability at any time without notice.
Page 2 □ Press the buckle at the back of the interface to uninstall the backplate(4). Place the backplate at the position where you intend to install the interface. Make sure that the backplate is level, and keep “KOHLER” logo pointing front. 25.3 25.3...
Page 3 OPERATION INSTRUCTIONS DTV MODE SERVICE PARTS How to Operate the Interface On/Off Symbol - (Top Button) 23775T-7 Bath Filler UI Turn the bath spout On/Off. Bath Spout Symbol - (Bottom Button) Turn bath spout On/Off. On/Off Symbol NOTES: Press either the On/Off button or bath spout button can turn on/off the spout.
Page 4 Under current technology, all hazardous materials have been used in the interface. smallest amounts possible. Kohler will strive to reduce the use of these hazardous materials used in this product. B. Check power supply, connect if needed.