Table of Contents
Advertisement
2. Connecting to Power
Plug the power adapter into your modem then connect to your
nearest power point.
3. Checking your modem is working
FIBRE:
The power, internet and WAN LEDs should all light up when
you are connected (1, 2, 9 below).
ADSL or VDSL:
up when you are connected (1, 2, 10 below).
1
2
1
3
1
2
4
4. If you have a phone or landline
For Fibre connections
Use the grey Phone Cable to connect from the VoIP 1 Port on the
modem to your landline phone.
If you have an ADSL or VDSL connection
Use the cord from your previous connection, to connect the VoIP
1 Port in the modem to your landline phone. Depending on your
landline model, the name of this cord will be either RJ12 - RJ12
or RJ12 - RJ11.
Please note it can take up to 3 hours for your phone to set itself up once it
has been connected.
Connection Flow
Please refer to the relevant diagram below to ensure you have
your connection set up correctly.
Fibre Connection
ADSL/VDSL
Connection
The power, internet and DSL LEDs should all light
2
3
5
3
4
6
4
5
5
7
6
6
7
8
7
8
9
8
10
9
10
9
10
Advertisement
Table of Contents
Need help?
Do you have a question about the TalkBox 2800 and is the answer not in the manual?
Questions and answers