Advertisement
5. Connecting your devices to broadband
Once you have connected your modem, and the correct LED
lights are displaying you will need to connect your internet
devices to your broadband connection.
Connecting Wireless Devices (Wi-Fi)
1. To set up your wireless internet devices you will need the
Wi-Fi name and password, which is located on the back of
your modem.
2. Using your smart phone, laptop or other wireless internet
device, click the wireless symbol
network name on the back of your modem. If you have not
changed this, the network names will be D-Link DVA-2800
and D-Link DVA-2800 5GHz.
3. Connect manually to each network and use the same
password for both network names.
Once both networks are saved on your device it should
automatically choose the best network, or you can manually
select between them.
Connecting Wired Devices (Eg. Computer)
1. If you have a device such as a computer that is wired to your
modem, you will need either your existing ethernet cable or
the one provided in your pack.
2. Connect the ethernet cable from your computer to any
of the 4 yellow LAN Ports on your modem.
3. For further assistance setting up your internet connection,
please consult the user guide of your device.
Changing your WiFi Settings
To change your WiFi settings, open a new window in your internet
browser (Eg. Chrome) and in the web address bar type
http://192.168.1.1
If you are prompted with a 'Welcome' Page, please select 'Cancel'
– you do not need to configure your Router.
If you are prompted to input a password, type 'Admin' by default.
Changing your WiFi Network Name and Password
1. Select the tab across the top labeled 'Settings', then select
'Wireless' from the drop down menu
2. Change the WiFi Name (SSID) of both the 2.4GHz
& 5GHz WiFi frequencies.
3. Change your password in the field below.
4. Press 'Save'
Having problems with your set up?
Please visit the help section of our website.
greypowerelectricity.co.nz/help | blackboxpower.co.nz/help
pulseenergy.co.nz/help
and connect to the
Advertisement
