Advertisement
Setup Guide – D-Link DVA-2800
Valid as of 20th May, 2021
This guide will step you through how to configure your DVA-2800. These settings reflect the standard
configuration we ship our router/modems with, make sure to follow these instructions carefully, as to
avoid problems.
Keep in mind that this guide will only be applicable if your internet connection is fully functioning. If you
are experiencing connection issues, please call GOINTERNET support on 1300 467 283.
1. Login to your router's portal.
a. Go to your web browser of choice and in the search bar, type in the IP Address: 192.168.1.1
b. After typing the IP Address in your search bar; you'll be on the D-Link Configuration Portal.
NOTE: If that IP address doesn't work, please call the GOINTERNET Support Team on 1300 467 283
c. Enter your router/modem's Admin Password to login.
Your login details are kept on record by GOINTERNET, and is provided to you email upon
signing up. If you do not have the password, please call our support team 1300 467 283, and
they can provide you the password.
If you have reset your modem to factory settings, the admin password will be "admin".
1300 467 283
support@gointernet.net.au
.
www.gointernet.net.au
Advertisement
Table of Contents
Related Manuals for D-Link DVA-2800
Summary of Contents for D-Link DVA-2800
- Page 1 Setup Guide – D-Link DVA-2800 Valid as of 20th May, 2021 This guide will step you through how to configure your DVA-2800. These settings reflect the standard configuration we ship our router/modems with, make sure to follow these instructions carefully, as to avoid problems.
- Page 2 Setup Guide – D-Link DVA-2800 2. Configure your WAN Access Type a. Hover over ‘Settings’ and click on ‘Internet’ in the drop-down. b. In the ‘Internet’ Settings, the first drop-down setting “WAN Access Type” will need to be changed according to your connection type.
- Page 3 Setup Guide – D-Link DVA-2800 3. Configure VLAN Settings NOTE: If your connection type is FTTP (Fibre to the Premises), skip this step. a. Enable “VLAN Tagged”. b. Type “100” in the “VLAN ID” setting. 4. Scroll down to ‘IPv4 Settings’.
- Page 4 Setup Guide – D-Link DVA-2800 7. Hover over ‘Management’ in the top menu and click on ‘System Admin’ in the drop-down. 8. On the Admin Page, change the ‘Admin Password’ to the IPv4 password we set in Step 4. 9. Scroll down to ‘Administration’.
- Page 5 Setup Guide – D-Link DVA-2800 Configure for VoIP If you have a VoIP service with GOINTERNET, follow these steps. 1. Hover over ‘Settings’ in the top menu and click on ‘VoIP’ in the drop-down 2. On the VoIP page, click on the ‘VoIP Provider’ drop-down and select “ATU”.
- Page 6 Enter your VoIP Username and Password. Both of these are available in your account at https://my.gointernet.net.au/. Click ‘Save’. Your D-Link DVA-2800 is now setup and ready to use. If you have further questions are need help with your setup, contact our support team: Call Us: 1300 467 283 Email us: support@gointernet.net.au...
Need help?
Do you have a question about the DVA-2800 and is the answer not in the manual?
Questions and answers