Advertisement
Modem Quick
Start Guide
Follow these instructions to set up your new
unlimited Broadband connection!
This is what has been included in your modem pack:
Dual Band AC1600 ADSL2+/VDSL2
Modem Router with VoIP (DVA-2800)
Power Adapter
Ethernet Cable
Phone Cable
Your Modem
WPS Button
Wireless
On/Off Button
Reset Button
DSL Port
GE WAN
USB Port
Port
GE LAN
Ports
Phone Ports
xDSL Microfilter/Splitter
Quick Install Guide &
Warranty Document
Power Button
Power Input
VOIP
USB
Port
Advertisement
Table of Contents
Related Manuals for D-Link TalkBox 2800
Summary of Contents for D-Link TalkBox 2800
- Page 1 Modem Quick Start Guide Follow these instructions to set up your new unlimited Broadband connection! This is what has been included in your modem pack: Dual Band AC1600 ADSL2+/VDSL2 Modem Router with VoIP (DVA-2800) Power Adapter xDSL Microfilter/Splitter Quick Install Guide & Ethernet Cable Warranty Document Phone Cable...
- Page 2 Depending on your broadband connection (Fibre, ADSL/VDSL) follow the steps below: 1. For Fibre Connections Connect the yellow ethernet cable from the red WAN Port of your modem to either the LAN1 or GE1 Port of your ONT. Your ONT will be located on your wall.
- Page 3 2. Connecting to Power Plug the power adapter into your modem then connect to your nearest power point. 3. Checking your modem is working FIBRE: The power, internet and WAN LEDs should all light up when you are connected (1, 2, 9 below). ADSL or VDSL: The power, internet and DSL LEDs should all light up when you are connected (1, 2, 10 below).
- Page 4 If you have not changed this, the network names will be D-Link DVA-2800 and D-Link DVA-2800 5GHz. 3. Connect manually to each network and use the same password for both network names.
Need help?
Do you have a question about the TalkBox 2800 and is the answer not in the manual?
Questions and answers