Download Print this page

D-Link DSL-4320L Setup Manual

Hide thumbs Also See for DSL-4320L:

Download this manual

D-Link DSL-4320L

Please follow the steps below to set up your D-Link DSL-4320L.

1. Ensure your NBN Connection Box is turned on.

2. Plug an Ethernet cable from the UNI-D1 port on your NBN Connection Box into

a LAN port of your choice (Port 4 in this example) on your D-Link modem.

If UNI-D1 doesn't work, try each UNI-D port.

3. Plug in the power cable and turn your D-Link modem on using the Power button.

4. You can connect devices such as PC desktops, laptops or gaming consoles by plugging

Ethernet cables from the device to any of the free LAN ports, or you can connect

devices via WiFi.

5. Go to http://dlinkrouter.local or http://192.168.1.1 in your browser.

Modem Setup Guide – NBN FTTP

Page 1 LAN port of your choice (Port 4 in this example) on your D-Link modem. If UNI-D1 doesn’t work, try each UNI-D port. 3. Plug in the power cable and turn your D-Link modem on using the Power button. 4. You can connect devices such as PC desktops, laptops or gaming consoles by plugging Ethernet cables from the device to any of the free LAN ports, or you can connect devices via WiFi.
Page 2 Modem Setup Guide – NBN FTTP 6. Log in with your D-Link modem username and password if you are prompted to log in. By default, these are: Username: admin Password: admin 7. Select Internet and Advanced Settings. 8. Select Residential Gateway from the WAN Access Type drop-down.