Additional Fenixs Advance Version; Thermal Assistant Page - RC Electronics FenixS basic User Manual

FenixS– user's manual
4 Additional FenixS advance version pages
The following pages in the next sub-paragraphs are only valid for advance version of the FenixS.

4.1 Thermal assistant page

While thermaling, all thermal information can be vied on Thermal assistant page. Designed to
provide best user interface displaying all essential thermal information to the pilot. The
displayed Thermal assistant page will show following information on main screen:
GAIN – will display accumulated/lost altitude from the very start of circling.

ALT – will display current altitude of the glider.

Wind indicator – will display wind speed and direction.

Thermal assistant page contains following layout. On the middle of the screen, graphical and
numerical wind indicators can be seen inside thermal assistant.
Main purpose of displaying thermal assistant circuit, is to show the pilot a map of the thermal
strength in the last full circuit. This will present approximated location of the currently best-
known thermal strength.
Figure 29: Thermal assistant page.
31
Document Revision: 1.0
September 2021