Main Page Sub-Menu - RC Electronics FenixS basic User Manual

FenixS– user's manual

3.1.7 Main page sub-menu

To access the sub-menu for adjusting MacCready, Ballast, Bugs, QNH, and Brightness both
FenixS versions have a different approaches.
ADVANCE VERSION
On advance version of the FenixS, the pilot must use short press to enter sub-menu on
➢
main page. Value can be then change by rotating the rotary knob in CW or CCW
direction. Every additional short press on the rotary knob will confirm last set value and
jump to the next setting.
BASIC VERSION
On basic version of the FenixS, rotating the rotary knob will automatically change the
➢
main page view to the volume dialog.
Volume Vario setting.
(Supported on Basic and Advance version)
MacCready setting.
(Supported only in Advance version)
Figure 14: Volume Vario set view.
Figure 15: MacCready set view.
18
Document Revision: 1.0
September 2021