Glider - RC Electronics FenixS basic User Manual

FenixS– user's manual

3.3.6 Glider

In Glider sub-menu all settings connected to properties of glider can be adjusted:
Select glider – entering setting will display a list of preinstalled types of the glider.

Simply select the type of glider and confirm the selection.
By confirming the type User polar, properties of glider type will be defined with
variables in sub-menu.
Polar A – variable to set polar A parameter of glider.

Polar B – variable to set polar B parameter of glider.

Polar C – variable to set polar C parameter of glider.

Empty mass – variable to set empty mass of glider.

Reference mass – variable to set reference mass of glider.

Max mass – variable to set maximal mass of the glider.

Wing area – variable to set wing area of glider.

Please see the documentation of your glider for all variables in "Glider" sub-menu.
Figure 24: Sub-menu Glider.
NOTE
27
Document Revision: 1.0
September 2021