User Interface; Rotary Knob; Software Update - RC Electronics FenixS basic User Manual

FenixS– user's manual

2.3 User interface

Only one rotary knob is used by the pilot to interact with the unit. To get more understanding
of its use, we will describe all functions in next sub-sections. Knob can be turned clockwise CW
or counter clockwise CCW with addition of a central push-press operation.

2.3.1 Rotary knob

Following functions are possible with use of rotary knob:
ADVANCE VERSION
 Rotation will change pages or change values in edit fields.
 Short press for confirmation, entering sub-menus and confirming edit values.
2 seconds press will perform exit from sub-page or enable the pilot to customize navbox

displayed data on main page.
BASIC VERSION
 Rotation will change vario volume.
 Short press for confirmation, entering to settings menu and confirming edit values.
2 seconds press will perform exit from sub-pages or enable the pilot to customize

navbox displayed data on main page.

2.4 Software update

New updates will be published on website www.rc-electronics.eu After downloading update
file, copy it to dedicated micro-SD card and use update procedure below:
➢ Shutdown device by cutting off power delivery.
➢ Insert micro-SD card in the side slot of the device.
➢ Restore power delivery and wait for update to complete.
➢ After successful update, micro-SD card can be removed.
During software update, keep external main input power present.
NOTE
10
Document Revision: 1.0
September 2021