Reserves All Rights; Basic Operation; Powering Up - RC Electronics FenixS basic User Manual

FenixS– user's manual

1.2 Reserves all rights

RC Electronics reserves all rights to this document and the information contained herein.
Product description, names, logos or product design may be completely or in separate
segments subject to property rights.
Any use of this document by way of reproduction, modification or third-party use, without the
written permission of RC Electronics is prohibited.
This document can be only updated or modified by RC Electronics. This document may be
revised by RC Electronics at any time.
For more additional info, please visit our website

2 Basic operation

In the following section we will provide more details of the FenixS unit. We will present you the
easiest way to start up using your new device and its features.

2.1 Powering up

To turn on the device, no interaction is needed. After connecting main power supply to the unit
power leads, the unit will automatically start up.
Once turned on, the following screens will appear on main display:
Intro screen (Advance or Basic – depending of the version)

 Basic initial setup page, where user will set next options:
Set Elevation – set take-off elevation.

Set QNH – set current air pressure.

Info – displaying active glider and reserve setting (Advance version only)

https://www.rc-electronics.eu/
8
Document Revision: 1.0
September 2021