Precautions Related To Installation And Wiring Work - NBK EPU-220 Instruction Manual

1
Safety Precautions

1.2 Precautions Related to Installation and Wiring Work

[Perform as Indicated in Order to Prevent Injury, Electric Shock, Fire, and Failure]
・ Be sure to install the product in a safe and secure manner to prevent fire or accidents in
case of an earthquake.
・ Ensure that wiring work is performed after installation and the power supply terminal
connections are properly insulated.
・ Be sure to install an external emergency stop circuit so that operation is immediately
COMPULSORY
/ INSTRUCTION
stopped and the power is shut off in the event of an abnormality.
・ If there is a potential for danger during a stoppage or a product failure, be sure to install
an external brake for holding the product.
[Prohibited Actions in Order to Prevent Injury, Electric Shock, Fire, and Failure]
・ Make sure that the power supply and other cords are protected from damage.
・ Ensure that fragments of metal cannot enter the product, it is protected from splashes of
water, and it is always kept dry.
PROHIBITED
・ Do not perform wiring work with wet hands.
・ Do not install the product in a place where it will be exposed to violent vibration or
shock.
WARNING
6