Table of Contents
Advertisement
4
Installation and Connections
4.2.7
Allowable Load
Adjust so that an excessive load is not applied to the output shaft.
Thrust load
Thrust load
・ Do not grip cables or the output shaft when moving the product.
・ Do not subject the output shaft to strong impacts.
COMPULSORY
/ INSTRUCTION
・ Do not apply excessive radial or thrust loads to the output shaft to prevent damaging
the bearings.
・ Precisely adjust the alignment of the output shaft and the mating device.
Allowable Load:
Radial load
Radial
Thrust
10mm
Radial load
10mm
CAUTION
31
Unit
19.6 N (4.4 lbf)
load
19.6 N (4.4 lbf)
load
High torque
adapter
190 N (42 lbf)
155 N (34 lbf)
Advertisement
Table of Contents
