If Using The High Torque Adapters And The Collars For High Torque Adapters (Optional) - NBK EPU-220 Instruction Manual

4
Installation and Connections
4.2.6 If Using the High Torque Adapters and the Collars for High
Torque Adapters (Optional)
① High torque adapter
② Output shaft
③ Collar for high torque adapter
⑤ Screw through-hole of collar
for high torque adapter
④ Output shaft screw hole
⑥ Hex socket set screw
1
Insert the ③ Collar for high torque
adapter into the ② Output shaft of
the ① High torque adapter.
2
Match the positions of the two
screw holes of the ④ Output shaft
of the high torque adapter with
the two ⑤ Screw through-holes of
the collar for high torque adapter.
Temporarily fix by using the ⑥ Hex
socket set screws (M6x8 or M6x10)
included with the collar for high torque
adapter.
When temporarily fixing, be careful
that the ⑥ Hex socket set screws do
not excessively protrude from the ③
Collar for high torque adapter.
③ Collar for high torque adapter
3
From this point, perform the same
procedures of "If Using the High
Torque Adapters (Optional)" starting
from step 4.
30
⑥ Hex socket
set screw
Refer to P. 25.