If Using The Collars (Optional) - NBK EPU-220 Instruction Manual

4
Installation and Connections
4.2.3

If Using the Collars (Optional)

③ Collar
④ Output shaft screw hole
⑤ Screw through-hole of collar
① Unit
② Output shaft
⑥ Hex socket set screw
1
Insert the ③ Collar into the ① Unit's ②
Output shaft.
2
Match the position of the ④ Output
shaft screw hole with the ⑤ Screw
through-hole of the collar, and then
temporarily fix using the ⑥ Hex socket
set screw included with the collar.
When temporarily fixing, be careful
that the ⑥ Hex socket set screw
included with the collar do not
excessively protrude from the ③
Collar.
③ Collar
22
⑥ Hex socket set screw