Game Winner Climber 2.0 Instruction Manual page 22

Installation Instructions
Step 7:
Once you reach your desired hunting
height position, adjust the seating platform
so it is at comfortable sitting height.
Sit on climbing bar so teeth bite into tree.
Step 8:
Locate Cable Cinch Strap assembled on
one side of Cable. Attach end of Cinch
Strap with hook on another side of Cable.
Pull webbing through buckle to tighten
straps as shown in Figure 20 for both of
Seating & Standing Platform.
For Cable Cinch Strap threading
instructions refer to Figure 21.
WARNING! The Cable Cinch Straps have
been included to help stabilize this Game
Winner climber treestand. They must be
engaged after reaching climbing height.
You must disengage the Cable Cinch
Straps prior to attempting to climb down.
Failure to follow these instructions may
result in serious injury or death!
Step 9:
Locate Ratchet Strap. Attach hook of
Ratchet Strap on Seating Platform frame
attachment. Wrap Ratchet Strap around
tree and attach another hook on other side
of Seating Platform frame as shown in
Figure 22 and ratchet tight.
For ratchet strap threading instructions,
refer to Figure 23.
WARNING! The Ratchet Strap has been
included to help stabilize this Game
Winner climber treestand. It must be
engaged after reaching climbing height.
You must disengage the Ratchet Strap
prior to attempting to climb down. Failure
to follow these instructions may result in
serious injury or death!
Sit on climbing bar so teeth bite into tree.
Never jump or bounce on climbing bar to
seat/dig teeth into tree.
Always attach security straps to top and bottom
sections once hunting height is reached.
Figure 20 Install Cable Cinch Straps
Figure 21
Figure 22
Figure 23
Figure 11
Install
Ratchet
Strap
22