Game Winner Climber 2.0 Instruction Manual page 13

Assembly Instructions
Step 4:
Locate the two Cable
Assemblies. You will notice that
there are two molded ends on
the cables. Insert one of these
molded ends into the receiver
on the Cable Support Arms as
shown in Figure 4.
One end of cable must be
secured onto the cable
support arm (Step 5) before
mounting / positioning
climber to the tree trunk.
Figure 4
The other one end of cable
must be secured onto the
Insert End of Cable Into Support Arm
cable support arm when
mounting/positioning climber
to the tree trunk.
Step 5:
Insert the Cable Locking Pin
through the Cable Support Arm
and Cable Assembly with the
spring clip facing the
OUTSIDE of the stand.
Secure the spring clip on the
Cable Locking Pin as shown in
Figure 5. Do this for both
Cable Locking Pins on Seating
and Standing Platforms.
WARNING! The Cable Locking
Pin MUST positioned with the
spring clip on the outside of
the Cable Support Arm. Prior
to using your climber stand,
ensure that the Cable Locking
Pins are indeed engaged with
the Cable Assemblies for both
of Seating & Standing Platform.
Failure to follow these Figure 5
instructions may result in
Install Cable Locking Pin
serious injury or death!
13