Electrolux 6 Series Service Manual page 17

• Button no. 5: OPTION
This button is related to LED (L2), and performs the option of:
− Extra-rinse.
Press this button to enable / disable the option related to it, with the
respective lighting / turning off of the LED. At the same time, the
programme time is updated (via the three digits).
• Button no. 6: OPTION
This button is related to LED (L3), and performs the option of:
− Time Save.
Press this button to enable / disable the option related to it, with the
respective lighting / turning off of the LED. At the same time, the
programme time is updated (via the three digits).
The following options can also be configured in appliances:
− Time Save: with two 2 levels, corresponding to: Daily and Super Quick. Press once for the Daily function, the
relevant LED lights up, press twice for the Super Quick function, the relevant LED will remain on fixed and at
the same time the three digit display will vary the cycle time.
− Stains and HOT and COLD Water are alternative options for the same button.
− When a solenoid valve for hot water is fitted, the related option is also configured.
• Button no. 7: DELAYED START
This button is configurable and has the DELAYED START function.
During the programme selection phase, a delayed start can be
selected, from 30' to 20 hours (30'
20h 0h) and the time is shown on the Display. During the
last hour the time decreases minute by minute.
To cancel the delayed start time, after the cycle has started, pause
the washing machine using the START / PAUSE button and cancel
the option.
• Button no. 8: START / PAUSE
This button is used to START the appliance or PAUSE it.
It is related to LED L4, which flashes when the appliance is on
pause, whereas it is lit continuously when the appliance is
performing a washing cycle.
Technical Support - A.D.L.
60' 90' 2h 3h...
17/83 599 74 12-51 Rev.00