Configure The Lorawan Gateway - RAKwireless RAK7249 Configuration Manual

Lorawan industrial gateway

Hide thumbs Also See for RAK7249:

Table of Contents

Note: Only the relevant section of the file are shown and the lines to be edited are in

red. The rest of the file has been omitted in order to keep posterity. Please only edit

the lines in

red

and leave the rest of the file as it is!

................................................................................................................................................

# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)

server="ssl://127.0.0.1:8883"

# Connect with the given username (optional)

username=""

# Connect with the given password (optional)

password=""

................................................................................................................................................

# CA certificate file (optional)

# Use this when setting up a secure connection (when server uses ssl://...)

# but the certificate used by the server is not trusted by any CA certificate

# on the server (e.g. when self generated).

ca_cert="/etc/loraserver/ca.crt"

# TLS certificate file (optional)

tls_cert="/etc/loraserver/loraserver.crt"

................................................................................................................................................

Step 3. Restart the loraserver service

systemctl restart loraserver

2.4 Configure the LoRaWAN Gateway

Step 1. Configure the LoRa Packet Forwarder Protocol to LoRa Gateway MQTT

Bridge in the LoRa Gateway Tab in the Gateway Web UI:

Table of Contents

Show Quick Links

Table of Contents

Rak7258