System - RAKwireless RAK7249 Configuration Manual

RAK7249/58

System

3.6
This is the place where you configure general device parameters.
System
3.5.1
Figure 24 | System configuration options
General Settings
The system time is displayed here. Additionally you can edit the Host Name and select the
Time zone.
Another way to get the correct time is to use Timing Synchronization. You can Enable NTP
client mode, enable NTP server and provide server candidate URLs.
Note that the Time Synchronization tab is displayed in all System submenus.
Logging
In case you want to keep a log of system events you can configure how this is done here:
You can set the Buffer size, provide the IP Address and port of an External log server, and
set the Log Level.
Language
By default, this is in Auto (English), however you can choose from several options including
German, Spanish, Russian, etc.
RAK LoRaWAN Industrial Gateway Configuration Guide
26