Service Information; Specifications - Black+Decker BW13 Instruction Manual

Cleaning the nozzle
1. Disconnect the lance from the nozzle.
2. Remove any dirt deposits from the nozzle hole using
the tool (10).
Cleaning the filter
Inspect the intake filter (7) and detergent filter (if fitted)
before each use, and clean in accordance with the
instructions if necessary.
Unjamming the motor
In case of lengthy stoppages, limescale sediments may
cause the motor to seize. To unjam the motor, turn the
drive shaft with a tool.
End-of-season storage
Treat the appliance with non-corrosive, non-toxic antifreeze
and lubricate the o-rings using the lubricating grease tube
(where supplied) as shown before storing it away for winter.
Put the appliance in a dry place, protected from frost.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your
BLACK+DECKER product needs replacement,
or if it is of no further use to you, do not dispose
of it with household waste. Make this product
available for separate collection.

SPECIFICATIONS

Power
Working Flow
Max water Flow
Pressure
Maximum Pressure
PSI
T° Input
Maximum Input Pressure
Repulsive Force of the Gun to
the Maximum Pressure
Motor Insulation
Motor Protection
Weight
(On models with this feature)
BW13
1300W (1,3 kW)
5 l/min
6,5 l/min
6,7 MPa (67 bar)
10 MPa (100 bar)
1450
50 ºC
1 MPa
9,6 N
Class F
IPX5
4,6 kg
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials. Local regulations may
provide for separate collection of electrical products
from the household, at municipal waste sites or by
the retailer when you purchase a new product.

SERVICE INFORMATION

BLACK+DECKER offers a full network of company-owned
and authorized service locations throughout Asia. All
BLACK+DECKER Service Centers are staffed with trained
personnel to provide customers with efficient and reliable
power tool service.Whether you need technical advice,
repair, or genuine factory replacement parts, contact the
BLACK+DECKER location nearest to you.
NOTES
f BLACK+DECKER's policy is one of continuous
improvement to our products and, as such, we reserve
the right to change product specifications without prior
notice.
f Standard equipment and accessories may vary by
country.
f Product specifications may differ by country.
f Complete product range may not be available in all
countries.
f Contact your local BLACK+DECKER dealers for range
availability.
BW14
1400W (1,4 kW) 1500W (1,5 kW)
5 l/min
6,5 l/min
7,4 MPa (67 bar) 8 MPa (67 bar)
11 MPa (100 bar) 12 MPa (100 bar)
1595
50 ºC
1 MPa
10,1 N
Class F
IPX5
4,9 kg
ENGLISH • 11
BW15 BW16
1600W (1,6 kW)
5 l/min 5,3 l/min
6,5 l/min 7 l/min
8,5 MPa (67 bar)
12,5 MPa (100 bar)
1740 1813
50 ºC 50 ºC
1 MPa 1 MPa
10,5 N 11,6 N
Class F Class F
IPX5 IPX5
4,9 kg 5,5 kg