Demtech Pro-Wedge XL Operator's Manual page 16

Rev. D, January 2021
d. Move the Wedge to the Engaged/Welding position by rotating the Wedge Engagement
Handle (1) (see Figure 4) counter-clockwise. Using a 5mm hex wrench adjust the
Wedge with the Wedge Height Adjustment Screw (2) (see Figure 4) as needed, up or
down, to center the Wedge between the Nip Rollers. Turning the Adjustment Screw
clockwise raises the Wedge, counter-clockwise lowers it.
1
2
Figure 4
Pro-Wedge XL Operator's Manual Page 13