Configuring Wan Failover Notification - Huawei B890 Online Help Manual

Step 2 From Notify when new SMS is received?, check Enable to enable the SMS
notification.
Step 3 From Notify when software update is available?, check the Enable to enable the
update notification.
Step 4 In Reminder Notification, enter a number in the textbox. For example, input 1 in the
textbox. If you ignore the notification page or click the Remind me later on it, the
notification page will be displayed again after 1 hour.
Step 5 Click Apply to take effect.
----End

11.9 Configuring Wan Failover Notification

If you are using Wireline priority mode to connect to the Internet, you will receive a
SMS or Email when your Smart Hub automatically switches to wireless when
Ethernet is disconnected, and vice versa.
Prerequisites
You can configure this function in any Connection Channel mode, but this function
will only take affect when you are in Wireline priority mode.
Procedure
Step 1 Choose Settings > Advanced > WanFailover Notification.
Step 2 From Do you want to be notified?, select a notified type.




Step 3 Enter the Device name and phone number(s) or Email address(es).
Step 4 Click Apply to take effect.
----End
Issue 01 (2013-02-05)
None: You will not receive notification message.
SMS: You can receive notification message by SMS.
Email: You can receive notification message by Email.
Both: You can receive notification message by SMS and Email.
A maximum of 5 receiving phone numbers and Email addresses can be entered. Each phone
number or Email address should be separated with semicolons ";".
HUAWEI B890 4G LTE Smart Hub
Online Help
39