Recommended Rf Connector For Antenna Installation - Quectel FC21 Hardware Design

Table 19: Antenna Requirements
Type
Frequency Range
VSWR
Gain (dBi)
Max Input Power (W)
Input Impedance (Ω)
Polarization Type

3.7.6. Recommended RF Connector for Antenna Installation

If RF connector is used for antenna connection, it is recommended to use the U.FL-R-SMT connector
provided by Hirose.
Figure 17: Dimensions of the U.FL-R-SMT Connector (Unit: mm)
U.FL-LP serial connectors listed in the following figure can be used to match the U.FL-R-SMT.
FC21_Hardware_Design
Requirements
2.412GHz~2.472GHz
5.180GHz~5.825GHz
< 2:1 recommended
Typically 1
50
50
Vertical
Wi-Fi&BT Module Series
FC21 Hardware Design
32 / 52
批注 [RL14]: 这个是连接器
吧， 中文里写的是连接线， 要不
要改为连接器