1. Manuals
  2. Brands
  3. AZZA Manuals
  4. Motherboard
  5. DIBX4
  6. User manual

AZZA DIBX4 User Manual

Pentium ii/iii celeron twin processor, intel 440bx atx mainboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DIBX4
Pentium II/III
Celeron
Twin Processor
Intel 440BX ATX MAINBOARD
( VER. 1.x )
USER'S MANUAL
DOC. NO. UM-DIBX4-E1 ................................................................................................. PRINTED IN TAIWAN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DIBX4 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for AZZA DIBX4

Summary of Contents for AZZA DIBX4

  • Page 1 DIBX4 Pentium II/III Celeron Twin Processor Intel 440BX ATX MAINBOARD ( VER. 1.x ) USER’S MANUAL DOC. NO. UM-DIBX4-E1 …………………………………………………..……………..……..…………. PRINTED IN TAIWAN...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Ultra 440BX ATX Mainboard TABLE OF CONTENTS CHAPTER & SECTION PAGE 1.INTRODUCTION OVERVIEW ..................1-1 MAINBOARD LAYOUT..............1-2 SPECIFICATIONS ................1-3 2. INSTALLATION UNPACKING ..................2-1 AMAZING WAYS TO POWER ON THE PC SYSTEM ....2-2 POWER OFF THE PC SYSTEM ............. 2-4 3.
  • Page 3 Ultra 440BX ATX Mainboard SOMETHING IMPORTANT ! ¶ TRADEMARKS All trademarks used in this manual are the property of their respective owners. ¶ LOAD SETUP DEFAULTS “LOAD SETUP DEFAULTS” is the function which will have the BIOS default settings loaded into the CMOS memory, these default settings are the best-case values which will optimize system performance and increase system stability This function will be necessitated when you receive this mainboard, or when the system CMOS data is corrupted.

  • Page 4: Introduction

    INTRODUCTION Ultra 440BX ATX Mainboard 1. INTRODUCTION OVERVIEW This Mainboard is a high performance personal computer mainboard. It is the ATX form-factor mainboard with both Slot 1 and Socket 370 on the board for various purposes. The Intel® 82440BX AGPset™ and Winbond® I/O chipset are chosen as the core logic of the mainboard to give the most outstanding performance and reliability.

  • Page 5: Mainboard Layout

    INTRODUCTION Ultra 440BX ATX Mainboard MAINBOARD LAYOUT CN5 Parallel Port PS/2 Mouse USB 1 CN12 JP133 JP100 PS/2 K/B USB 2 CN11 SB-Link IR Port CN4 CN3 KB/Mouse. Power On Sel. CN13 CN16 CPU Fan Socket 370 PW ( Power SW JP12 JP11 SL (...

  • Page 6: Specifications

    INTRODUCTION Ultra 440BX ATX Mainboard SPECIFICATIONS ¥ CPU Intel® Pentium™ II, Pentium™ III or Celeron™ (for Slot and Socket type ) 233, 266, 300, 333. 350, 366, 400, 433, 450, 466, 500MHz and higher speed processors ¥ CPU VCC Switching Voltage Regulator circuits on board, supports +1.30V DC through +3.5V DC CPU Core Voltage.
  • Page 7 INTRODUCTION Ultra 440BX ATX Mainboard ¥ SB-LINK PORTS One SB-LINK feature connector to support PCI sound cards. (such as Creative™ Labs EMU8008 sound chip) ¥ USB PORTS Two Universal Serial Bus (USB) ports. ¥ IDE PORTS Two Ultra DMA/33 (ATA/33)IDE ports and two Ultra DMA/66 (ATA/66) IDE ports, which will support up to 8 IDE devices like IDE hard disk, ATAPI CD-ROM and LS-120/ZIP-100 devices.
  • Page 8 INTRODUCTION Ultra 440BX ATX Mainboard ¥ ACPI Advanced Configuration and Power Interface (ACPI) function is strongly recommended by PC’98 because it will let you have many additional features and that will make your PC system becomes very friendly and convenient. Followings are the ACPI features designed on the board: 1.

  • Page 9: Installation

    INSTALLATION Ultra 440BX ATX Mainboard 2. INSTALLATION 2.1 UNPACKING The mainboard contains the following components. Please inspect the following contents and confirm that everything is there in the package. If anything is missing or damaged, call your supplier for instructions before proceeding. l This mainboard.

  • Page 10: Amazing Ways To Power On The Pc System

    INSTALLATION Ultra 440BX ATX Mainboard 2.2 AMAZING WAYS TO POWER ON THE PC SYSTEM When the mainboard has been installed successfully, there are several ways to power on the system. Please read the following description for all the details. POWER BUTTON The power button can be programmed by COMS setup program and it has different features.
  • Page 11 INSTALLATION Ultra 440BX ATX Mainboard ¨ PS/2™ MOUSE (LEFT OR RIGHT MOUSE BUTTON) If you have a PS/2™ mouse connected to the system, you may change the setup in the BIOS and use the mouse click to turn on the PC system power. Please refer to section 4.9 for the BIOS setting To use the mouse key to turn on the PC system power, the mouse click must be done quickly and continually.

  • Page 12: Power Off The Pc System

    INSTALLATION Ultra 440BX ATX Mainboard In order to use the ring-in signal to wake up your PC system, you will have to use the EXTERNAL MODEM and have it connected to one of the SERIAL PORTS ( COMA or COM B ) on the mainboard. When the mainboard detects the ring-in signal from the serial port, the system power will be turned on and start to receive the incoming messages automatically.

  • Page 13: Hardware Setup

    INSTALLATION Ultra 440BX ATX Mainboard 3. HARDWARE SETUP Before you can start to install this mainboard, some hardware settings is required to make sure it will work perfectly with the devices which you are going to install in your PC system. To configure the mainboard is a simple task, only a few jumpers, connectors, cables and sockets needs to be selected and configured.

  • Page 14: Installing The Dram Modules

    INSTALLATION Ultra 440BX ATX Mainboard 3.2 INSTALLING THE DRAM MODULES This mainboard has three DIMM sockets designed on the mainboard, all the DIMM sockets on the mainboard support the single side and double side DIMM modules, In order to have a better performance, only the Synchronous (SDRAM) memory is recommended.

  • Page 15: Connectors

    INSTALLATION Ultra 440BX ATX Mainboard 2. Minimum one DIMM module must be installed on the mainboard. 3. You can use single side or double side DIMM module on this mainboard. 4. Always install DIMM module starting from DIMM 1 socket first, and then DIMM 2 and DIMM 3.
  • Page 16 INSTALLATION Ultra 440BX ATX Mainboard (B) CN1CN2: PS/2 Mouse and Keyboard Connector CN2 : PS/2 Mouse Connector CN1 : PS/2 Keyboard Connector (C) CN3 : Serial Port COM 1 Connector (D) CN4 : Serial Port COM 2 Connector COM 1 COM 2 ( COM ports viewed from the real panel) Ping assignment of serial port connector:...
  • Page 17 INSTALLATION Ultra 440BX ATX Mainboard (E) CN5: Parallel Port Connector The parallel port on the mainboard supports SPP/EPP/ECP modes, IRQ7 or IRQ5 is selectable, ECP mode will use either DMA channel 3 or channel 1 which can be selected by the CMOS setup program Parallel Port Pin assignment of parallel port: 1 14...
  • Page 18 INSTALLATION Ultra 440BX ATX Mainboard (F) CN6: USB Port 1 (Universal Serial Bus) Connector (G) CN7: USB Port 2 (Universal Serial Bus) Connector CN6 USB 1 CN7 USB 2 Pin assignment of USB connector: Pin1: +5VDC USB 1 USB 2 Pin2: DATA- Pin3: DATA+ Pin4: Ground...
  • Page 19 INSTALLATION Ultra 440BX ATX Mainboard (I) CN9 : IDE 1 Connectors (Secondary ATA/33 IDE Port: 170H, IRQ 15) (J) CN10: IDE 2 Connectors (Primary ATA/33 IDE Port: 1F0H, IRQ 14) There are two IDE cables come with the mainboard. Since IDE1 and IDE2 supports the ATA/33 mode.
  • Page 20 INSTALLATION Ultra 440BX ATX Mainboard (L) CN12: IR / FIR (Infrared Rays) Connector Consumer IR Connector ( Consumer IR connector is active only when W83977CTF-AW I/O Chip is installed on position U9 ) IR/FIR (INFRARED RAYS) CONNECTOR CONSUMER IR CONNECTOR +5VDC +5VDC NO CONNECTION...
  • Page 21 INSTALLATION Ultra 440BX ATX Mainboard CN15: ATX Power Connector CN15 ATX Power connector Pin assignment of ATX power connector 11 1 Pin # Signal name Pin # Signal name + 3.3V DC + 3.3V DC - 12V DC + 3.3V DC Ground Ground PS-ON...
  • Page 22 INSTALLATION Ultra 440BX ATX Mainboard (O) CN16: WOL (Wake On LAN) Connector In order to use the WOL LAN card to trigger the power of the PC system, the switching power supply must be able to provide at least 700mA current driving ability on the “5V standby”...
  • Page 23 INSTALLATION Ultra 440BX ATX Mainboard (Q) CN28 :IDE 3 Connectors (Primary ATA/66 IDE port) (R) CN29: IDE 4 Connectors (Secondary ATA/66 IDE port) There are two IDE cables come with the mainboard - the 80-conductor cable and the 40-conductor cable. IDE3 and IDE4 support the ATA / 66 burst data transfer rate.
  • Page 24 INSTALLATION Ultra 440BX ATX Mainboard Reset Button Connector Pin # Signal name Pin1&2 Function Reset Control Open No action Ground Short System Reset IDE HDD LED Connector Pin # Signal name + 5V DC Pull-up HDD Active Signal Sleep LED Connector This LED will be lightened when the AC power is connected and the system is power off, darkened when the AC power is disconnected or the system is powered on.
  • Page 25 INSTALLATION Ultra 440BX ATX Mainboard ‚ The setup in CMOS is “Instant-off”: A. When system power is off : Click on this switch, the system will be powered on. (when “password” is selected in the CMOS setup program, you will be unable to use the PW button to power on the PC system, please see Section 2.2 and Section 4.9 for more details.

  • Page 26: Jumpers

    INSTALLATION Ultra 440BX ATX Mainboard PWR-LED & KBLOCK: Front Panel Power LED and Key-Lock Connector Pin # Signal name Pullup (+ 5V DC for Power LED) No Connection Ground Keyboard Lock Ground 3.4 JUMPERS This section will discuss the jumper setting on the mainboard. In order to let you have better idea of the jumper setting, please see below for the explanation of jumper settings before you start this section.
  • Page 27 INSTALLATION Ultra 440BX ATX Mainboard The Keyboard and PS/2 Mouse OnNow function is designed on the mainboard and you can use keyboard and mouse key clicks to power on the PC system. However, there may have some keyboard and mouse are not compatible with the OnNow function.
  • Page 28 INSTALLATION Ultra 440BX ATX Mainboard This mainboard will detect the CPU type and choose the proper CPU voltage. Incase that you feel like to adjust the CPU voltage higher then what is detected by the mainboard. You may use JP11 to adjust the CPU voltage. When "SHORT" is selected, the CPU voltage will be 0.05V higher than normal voltage.
  • Page 29 INSTALLATION Ultra 440BX ATX Mainboard OPEN: Vcore = 1.3V ~ 2.05V SHORT : Vcore = 1.3V ~ 3.5V. JP12 (E) JP100: Over Clock Selection JP100 is designed on the board for some special purpose. (Please do not attempt to change this setting unless you are the technician). Please refer to the following for functional description..
  • Page 30 INSTALLATION Ultra 440BX ATX Mainboard Note: 1. JP100 will have no function unless "Default" is selected in the "CPU HOST CLOCK" in the BIOS setup program ( refer to Section. 4-6 ). Please do not to make jumper setting on JP100 unless you are the professional technician.

  • Page 31: Installation Of Device Drivers

    INSTALLATION Ultra 440BX ATX Mainboard Settings of the toggle switch: CPU (MHz) Clock Ratio 233, 350 3.5X 266, 400 4.0X 300, 450 4.5X 333, 500 5.0X 366, 550 5.5X 400, 600 6.0X 433, 650 6.5X 466, 700 7.0X 500, 750 7.5X 533, 800 8.0X...

  • Page 32: Installation Of The Ata/66 Ide Interface

    INSTALLATION Ultra 440BX ATX Mainboard B. Install PCI Bridge: (You don't have to install this driver if you are installing Windows 98. This driver is designed for Windows 95 only) Step 1. Insert the CD into the CD ROM drive. Step 2.
  • Page 33 INSTALLATION Ultra 440BX ATX Mainboard Note: 1. The 80-conductor cable is required to support the ATA/66 data transfer mode. If you are using the 40-conductor cable on these interface, then the performance may reduced to the regular ATA /33 mode. 2.
  • Page 34 INSTALLATION Ultra 440BX ATX Mainboard Step 4. Remove the "PCI Mass Storage Controller" and then exit "System" and close the "Control Panel". (Refer to the following picture) Step 5. Restart the PC system. Step 6. Refer to the next procedure "B. Install the drivers with the existing Windows 95"...
  • Page 35 INSTALLATION Ultra 440BX ATX Mainboard Step 3. Click "Other Locations" button. Step 4. Insert the " Ultra ATA /66 Device Driver" floppy diskette into the floppy disk drive. (A:) and then click the "Browse " button. Step 5. Select "Floppy (A)" then choose "Win9X"...
  • Page 36 INSTALLATION Ultra 440BX ATX Mainboard Step 7. Click on the "Browse …" button. C:\Win9X Step 8. Select the "Win9X" folder in drive A and then click on the Win9X "OK" button. Step 9. When you see "A:\Win9X" selected in the dialog box, click "OK"...
  • Page 37 INSTALLATION Ultra 440BX ATX Mainboard Step 12. When the PC system has restarted, select "Control Panel" è "System" and then select "Device Manager" è "SCSI Controller". If you can see the device as show in the picture, then the device driver is installed properly.. Windows 98: A.
  • Page 38 INSTALLATION Ultra 440BX ATX Mainboard B. Install the drivers with the existing Windows 98 (you may use the 80-conductor cable and have the HDD connected to IDE3) Step 1. If you are using this mainboard to upgrade your PC system, then the Windows operation system will detect new hard ware when you power on your PC system.
  • Page 39 INSTALLATION Ultra 440BX ATX Mainboard Step 5. Click the "Next" buttons and follow the screen instruction to continue the installation. Step 6. When the installation of the device driver is completed, Click "Fihish." button Step 7. click "No" to install another "PCI Mass Storage Controller".
  • Page 40 INSTALLATION Ultra 440BX ATX Mainboard Windows NT 4.0: When install the Windows operation system, you will have to load the operation system from the CD ROM drive. So please click on the "Del" key during the POST (Power-On-Self-Test) to trigger the BIOS setup program. Select the "BIOS FEATURES SETUP"...
  • Page 41 INSTALLATION Ultra 440BX ATX Mainboard Step 4. Insert the " Ultra ATA /66 Device Driver" floppy diskette into the floppy disk drive. (A:\), and then click "Enter" again. Step 5. Click the " Enter" key to continue the installation. Step 6. Windows NT recognizes the High Point ATA/66 device as shown in the picture, Click the "Enter"...
  • Page 42 INSTALLATION Ultra 440BX ATX Mainboard Step 7. When you have configured the HDD and specified the path. NT setup program will ask you to insert the disk into drive A again. Make sure the " Ultra ATA /66 Device Driver" diskette is in the floppy disk drive and then click the "Enter"...
  • Page 43 INSTALLATION Ultra 440BX ATX Mainboard Step 3. Click the "Have Disk .." button. Step 4. Insert the "Ultra ATA/66 Device Driver" floppy disk into the FDD and then click the "OK" button. Step5. When you see the High Point HPT366 Ultra DMA controller shown in the window, click the "OK"...
  • Page 44 INSTALLATION Ultra 440BX ATX Mainboard Step7. When the installation is completed, you will have to restart the PC system so that the device driver will be enabled. Click the "Yes" button to restart the computer. Note: When you have finished the installation of the device driver, you may feel free to have the hard disk drive connected to IDE 3 and use it to load the operation system.

  • Page 45: Award Bios Setup

    AWARD BIOS SETUP Ultra 440BX ATX Mainboard AWARD BIOS SETUP 4.1 GETTING STARTED When the system is first time powered on or reset by user, the system BIOS will enter the POST routines (Power On Self Test), which will execute a diagnostics and initialize the computer.

  • Page 46: Control Keys

    AWARD BIOS SETUP Ultra 440BX ATX Mainboard 4.3 CONTROL KEYS Listed below is the explanation of the keys displayed at the bottom of the screens which will be used in the CMOS SETUP program : Arrow Keys : Use the arrow keys to move the cursor to the desired item. Enter : Select the desired item.

  • Page 47: Bios Features Setup

    AWARD BIOS SETUP Ultra 440BX ATX Mainboard MODE : The BIOS on the mainboard is the updated one and which provides three different modes to support both normal IDE HDD and the one which is above 528MB: Ø NORMAL : For IDE hard disk drives which is smaller than 528MB. Ø...
  • Page 48 AWARD BIOS SETUP Ultra 440BX ATX Mainboard Virus Warning : Basically, The default setting of this feature is "Disabled" In order to avoid virus infection happens on your PC system, This mainboard provides the virus warning features in the BIOS. During and after the operation system is loaded, any attempt to write to the boot sector or partition table on the IDE hard disk drive will trigger this feature and give you some warning messages on the screen and then halt the system.
  • Page 49 AWARD BIOS SETUP Ultra 440BX ATX Mainboard Boot Sequence : ( default setting: A,C,SCSI ) This field allows you to use some other device to load the operating system which is connected to the ATA /33 interface. (IDE1 and IDE2). If you prefer to use the onboard ATA/66 interface to start the operation system then please select “SCSI,A,C”...

  • Page 50: Chipset Features Setup

    AWARD BIOS SETUP Ultra 440BX ATX Mainboard 4.6 CHIPSET FEATURES SETUP ROM PCI / ISA BIOS (2A69KXXX) CHIPSET FEATURES SETUP AWARD SOFTWARE, INC. Auto Configuration : Enabled Auto Detect DIMM/PCI Clk : Enabled EDO DRAM Speed Selection : 60ns Spread Spectrum Modulated : Disabled EDO CASx# MA wait State CPU Host Clock (CPU/PCI) : Default EDO RASx# Wait State...
  • Page 51 AWARD BIOS SETUP Ultra 440BX ATX Mainboard When “Auto Configuration” is “Enabled”, the “DRAM speed selection” field will be disappeared and you may use the other fields to configure the DRAM speed. Basically, it is not recommended unless you are the professional technician. EDO CASx# MA / RASx# Wait State : ( default setting : “2”...
  • Page 52 AWARD BIOS SETUP Ultra 440BX ATX Mainboard 8 Bit I/O Recovery Time: ( default setting : “1” ) The recovery time is the length of time, measured in CPU clocks, which the system will delay after the completion of an input/output request. This delay takes place because the CPU is operating so much faster than the input/output bus that the CPU must be delayed to allow for the completion of the I/O.
  • Page 53 AWARD BIOS SETUP Ultra 440BX ATX Mainboard It seems that the default setting –64MB is huge. In fact, what is defined in the BIOS selection is to tell the operation system the maximum memory can be shared by AGP card to store the 3D texture mapping data. So you need not to worry that your system memory will be insufficient.
  • Page 54 AWARD BIOS SETUP Ultra 440BX ATX Mainboard Note: 1. The higher FSB frequency will surely give you the higher system performance. However, it is not recommended because it may cause the system unstable, especially the component like DRAM, HDD, Add on card is not fast enough. 2.

  • Page 55: Power Management Setup

    AWARD BIOS SETUP Ultra 440BX ATX Mainboard 4.7 POWER MANAGEMENT SETUP ROM PCI / ISA BIOS (2A69KXXX) POWER MANAGEMENT SETUP AWARD SOFTWARE, INC. ACPI function Disabled ** Reload Global Timer Events ** Power Management : User Define PM Control by APM : Yes IRQ [3-7 , 9-15], NMI : Enabled...
  • Page 56 AWARD BIOS SETUP Ultra 440BX ATX Mainboard According to what was defined by the ACPI in Windows 98, the PW switch can be either the "Standby switch" or "shutdown switch". When "Standby switch" is selected, the first click on the PW switch will have the PC system turn into standby mode.
  • Page 57 AWARD BIOS SETUP Ultra 440BX ATX Mainboard Video Off Method: (Default setting: Blank screen ) When you are using the Green Monitor with your PC system, there are three modes selectable in this field to save the power energy This selection will cause the system to turn off the V/H SYNC+Blank vertical and horizontal synchronization ports and write blanks to the video buffer.
  • Page 58 AWARD BIOS SETUP Ultra 440BX ATX Mainboard Suspend Mode: ( Default setting: Disable ) When enabled and after the set time of system inactivity, all devices except the CPU will be shut off. HDD Power Down: ( Default setting: Disable ) When enabled and after the set time of system inactivity, the hard disk drive will be powered down while all other devices remain active.
  • Page 59 AWARD BIOS SETUP Ultra 440BX ATX Mainboard **** Reload Global Timer Events **** When "Enabled", an event occurring on each device listed below restarts the global time for Standby mode. IRQ[3 -7, 9-15], NMI Primary IDE 0 Primary IDE 1 Secondary IDE 0 Secondary IDE 1 Floppy Disk...

  • Page 60: Pnp/Pci Configuration

    AWARD BIOS SETUP Ultra 440BX ATX Mainboard PNP/PCI CONFIGURATION ROM PCI / ISA BIOS (2A69KXXX) PNP/PCI CONFIGURATION AWARD SOFTWARE, INC. PNP OS Installed Assign IRQ for VGA : Disabled Resources Controlled By : Manual Reset Configuration Data : Disabled Used MEM base addr : N/A IRQ-3 assigned to...
  • Page 61 AWARD BIOS SETUP Ultra 440BX ATX Mainboard Resources Controlled by : (Default setting: Manual) Manual : The system BIOS will not refer to the ESCD data to assign IRQ & DMA. Instead, it will refer to the information recorded in this field when Assigning the IRQ &...
  • Page 62 AWARD BIOS SETUP Ultra 440BX ATX Mainboard Used MEM base addr and Used MEM Length : These fields are used for some special ISA legacy cards which will request memory space below 1M address. Please refer to the user’s manual of your add on card to find whether it will need such memory space.

  • Page 63: Integrated Peripherals

    AWARD BIOS SETUP Ultra 440BX ATX Mainboard 4.9 INTEGRATED PERIPHERALS ROM PCI / ISA BIOS (2A69KXXX) INTEGRATED PERIPHERALS AWARD SOFTWARE, INC. IDE HDD Block Mode Enabled Onboard Serial Port 2 : 2F8/IRQ3 IDE Primary Master PIO : Auto UART Mode Select : Normal IDE Primary Slave PIO : Auto...
  • Page 64 AWARD BIOS SETUP Ultra 440BX ATX Mainboard IDE Primary/Secondary Master/Slave PIO: ( Default setting : “Auto” ) The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of the four IDE devices that the onboard IDE interface supports. Modes 0 through 4 provide successively increased performance.
  • Page 65 AWARD BIOS SETUP Ultra 440BX ATX Mainboard Onboard Serial Port 1/Port 2: ( Default setting : “3F8/IRQ4, 2F8/IRQ3” ) This item allows you to determine access onboard serial port 1/port 2 controller with which I/O address. The Choice: 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto. UART 2 Mode: ( Default setting : “Standard”...

  • Page 66: Load Setup Defaults

    AWARD BIOS SETUP Ultra 440BX ATX Mainboard 4.10 LOAD SETUP DEFAULTS ROM PCI / ISA BIOS (2A69KXXX) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP SUPERVISOR PASSWORD BIOS FEATURES SETUP USER PASSWORD CHIPSET FEATURES SETUP IDE HDD AUTO DETECTION POWER MANAGEMENT SETUP SAVE &...

  • Page 67: Supervisor Password

    AWARD BIOS SETUP Ultra 440BX ATX Mainboard 4.11 SUPERVISOR PASSWORD ROM PCI / ISA BIOS (2A69KXXX) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP SUPERVISOR PASSWORD BIOS FEATURES SETUP USER PASSWORD CHIPSET FEATURES SETUP IDE HDD AUTO DETECTION POWER MANAGEMENT SETUP SAVE &...

  • Page 68: User Password

    AWARD BIOS SETUP Ultra 440BX ATX Mainboard 4.12 USER PASSWORD ROM PCI / ISA BIOS (2A69KXXX) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP SUPERVISOR PASSWORD BIOS FEATURES SETUP USER PASSWORD CHIPSET FEATURES SETUP IDE HDD AUTO DETECTION POWER MANAGEMENT SETUP SAVE &...
  • Page 69 AWARD BIOS SETUP Ultra 440BX ATX Mainboard B. When there is no password stored in the "SUPERVISOR PASSWORD" 1. When "Setup" is selected in Security Option: Users can use the "User Password" to log into the BIOS setup program, and they can make all the change in the BIOS setup program.

  • Page 70: Ide Hdd Auto Detection

    AWARD BIOS SETUP Ultra 440BX ATX Mainboard 4.13 IDE HDD AUTO DETECTION ROM PCI / ISA BIOS (2A69KXXX) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP SUPERVISOR PASSWORD BIOS FEATURES SETUP USER PASSWORD CHIPSET FEATURES SETUP IDE HDD AUTO DETECTION POWER MANAGEMENT SETUP SAVE &...

  • Page 71: Save & Exit Setup

    AWARD BIOS SETUP Ultra 440BX ATX Mainboard 4.14 SAVE & EXIT SETUP ROM PCI / ISA BIOS (2A69KXXX) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP SUPERVISOR PASSWORD BIOS FEATURES SETUP USER PASSWORD CHIPSET FEATURES SETUP IDE HDD AUTO DETECTION POWER MANAGEMENT SETUP SAVE &...

  • Page 72: Exit Without Saving

    AWARD BIOS SETUP Ultra 440BX ATX Mainboard 4.15 EXIT WITHOUT SAVING ROM PCI / ISA BIOS (2A69KXXX) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP SUPERVISOR PASSWORD BIOS FEATURES SETUP USER PASSWORD CHIPSET FEATURES SETUP IDE HDD AUTO DETECTION POWER MANAGEMENT SETUP HDD LOW LEVEL FORMAT INTEGRATED PERIPHERALS...

This manual is also suitable for:

Pt-dibx4

Table of Contents