1. Manuals
  2. Brands
  3. AZZA Manuals
  4. Motherboard
  5. 694TX
  6. User manual

AZZA 694TX User Manual

Pentium iii celiron socket 370 atx mainboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
694TX/694TXL
Pentium !!!
Celeron
Socket 370
ATX MAINBOARD
( VER. 1.x )
USER'S MANUAL
........................................................................
PRINTED IN TAIWAN
DOC NUMBER: UM-694TX-E3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 694TX and is the answer not in the manual?

Questions and answers

Related Manuals for AZZA 694TX

Summary of Contents for AZZA 694TX

  • Page 1 694TX/694TXL Pentium !!! Celeron Socket 370 ATX MAINBOARD ( VER. 1.x ) USER’S MANUAL ................ PRINTED IN TAIWAN DOC NUMBER: UM-694TX-E3...

  • Page 2: Table Of Contents

    VIA 82C694 ATX Mainboard TABLE OF CONTENTS TABLE OF CONTENTS Chapter & Section Page 1. INTRODUCTION ..................... 1-1 OVERVIEW ................... 1-1 MAINBOARD LAYOUT ..............1-2 SPECIFICATIONS ................1-3 2. INSTALLATION ....................2-1 UNPACKING ..................2-1 AMAZING WAYS TO POWER ON THE PC SYSTEM....2-2 POWER OFF THE PC SYSTEM............
  • Page 3 VIA 82C694 ATX Mainboard SOMETHING IMPORTANT ! ¶ TRADEMARKS All trademarks used in this manual are the property of their respective owners. ¶ LOAD SETUP DEFAULTS “LOAD SETUP DEFAULTS” is the function which will have the BIOS default settings loaded into the CMOS memory, these default settings are the best-case values which will optimize system performance and increase system stability This function will be necessitated when you receive this mainboard, or when the system CMOS data is corrupted.

  • Page 4: Introduction

    There is also the 3D audio interface integrated on the mainboard (694TX has the audio interface designed on the board, but 694TXL does not support audio interface and AMP slot.). When the audio interface is installed on the mainboard, you need not invest any on the audio interface card.

  • Page 5: Mainboard Layout

    VIA 82C694 ATX Mainboard INTRODUCTION MAINBOARD LAYOUT PS/2 Game/MIDI USB1 Parallel Port Mouse Port Note: Audio port (CN18) and AMR slot are the optional choices on the mainboard. USB2 COM1 COM 2 Audio Port...

  • Page 6: Specifications

    VIA 82C694 ATX Mainboard INTRODUCTION SPECIFICATIONS ¥ CPU Intel® Socket 370 Pentium™ !!! or Celeron™ 300, 333, 366, 400, 433, 466, 500, 533, 550, 600MHz and higher speed processors ¥ CPU VCC Switching Voltage Regulator circuits on board, supports +1.30V DC through +2.05V DC CPU Core Voltage.

  • Page 7: Hardware Monitoring

    VIA 82C694 ATX Mainboard INTRODUCTION ¥ USB PORTS Four Universal Serial Bus (USB) ports.. ¥ IDE PORTS Two channels of Ultra DMA33/66 Bus Master IDE ports, which will support up to 4 IDE devices like IDE hard disk, ATAPI CD-ROM and LS-120/ZIP-100 devices. The IDE ports can be programmed to support PIO Mode 4, DMA mode 2 and Ultra DMA33/66 to support the modern IDE devices.
  • Page 8 VIA 82C694 ATX Mainboard INTRODUCTION ¥ ACPI Advanced Configuration and Power Interface (ACPI) function is strongly recommended by PC’98 because it will let you have many additional features and that will make your PC system becomes very friendly and convenient. Followings are the ACPI features designed on the board: 1.

  • Page 9: Installation

    VIA 82C694 ATX Mainboard INSTALLATION 2. INSTALLATION UNPACKING The mainboard contains the following components. Please inspect the following contents and confirm that everything is there in the package. If anything is missing or damaged, call your supplier for instructions before proceeding. l This mainboard.

  • Page 10: Amazing Ways To Power On The Pc System

    VIA 82C694 ATX Mainboard INSTALLATION 2.2 AMAZING WAYS TO POWER ON THE PC SYSTEM When the mainboard has been installed successfully, there are several ways to power on the system. Please read the following description for all the details. ¨ POWER BUTTON The power button can be programmed by COMS setup program and it has different features.

  • Page 11: Power Off The Pc System

    VIA 82C694 ATX Mainboard INSTALLATION ( COM1 or COM2 ) on the mainboard. When the mainboard detects the ring-in signal from the serial port, the system power will be turned on and start to receive the incoming messages automatically. ( you need to have the software like Award Zero-Volt Data-Suspend Utility so that you can use the fax utility to receive the incoming fax message ).

  • Page 12: Hardware Setup

    VIA 82C694 ATX Mainboard HARDWARE SETUP 3. HARDWARE SETUP Before you can start to install this mainboard, some hardware setting is required so that it will work perfectly. To configure the mainboard is a simple task, only a few jumpers, connectors, cables and sockets need to be selected and configured. This section will show all the connectors and jumpers on the mainboard.

  • Page 13: Install The Dram Modules

    VIA 82C694 ATX Mainboard HARDWARE SETUP 3.2 INSTALL THE DRAM MODULES This mainboard has three DIMM sockets designed on the mainboard and you can use the single-side or double-side DIMM module on the mainboard. DIMM 3 DIMM 2 DIMM 1 Picture of Memory sub-system.

  • Page 14: Connectors

    VIA 82C694 ATX Mainboard HARDWARE SETUP CONNECTORS The connectors on the mainboard are either the pin header type or D-type connectors, they are used to connect the accessories or peripheral devices (such as power, mouse, printer,...etc.). Followings are the connectors with its description and the pin assignment which is designed on the mainboard.
  • Page 15 VIA 82C694 ATX Mainboard HARDWARE SETUP (C) CN3 : Serial Port COM 1 Connector (D) CN4 : Serial Port COM 2 Connector COM 1 COM 2 (I/O address: 3F8H/2F8H/3E8H/2E8H, IRQ3/IRQ4, selected by CMOS setup.) (E) CN5: Parallel Port Connector (Supports SPP/EPP/ECP modes, IRQ7 or IRQ5 is selectable, ECP mode will use either DMA channel 3 or channel 1 which can be selected by the CMOS setup probram) PARALLEL PORT...
  • Page 16 VIA 82C694 ATX Mainboard HARDWARE SETUP (F) CN6: USB Port 1 (Universal Serial Bus) Connector (G) CN7: USB Port 2 (Universal Serial Bus) Connector USB 1 USB 2 (H) CN8: Floppy Disk Control Port Connector (Use IRQ6, DMA channel 2) CN8: FDC Connector...
  • Page 17 VIA 82C694 ATX Mainboard HARDWARE SETUP (I) CN9 : IDE 1 Connectors (Primary IDE Port: 1F0H, IRQ 14) (J) CN10: IDE 2 Connectors (Secondary IDE Port: 170H, IRQ 15) CN9: IDE 1 CN10: IDE 2 (K) CN12: IR (Infrared Rays) Connector +5VDC NO CONNECTION IR RECEIVE...
  • Page 18 VIA 82C694 ATX Mainboard HARDWARE SETUP (L) CN13: CPU Cooling Fan Power Connector +12V CN13 Fan Signal (M) CN15: ATX Power Connector CN15 ATX Power connector...
  • Page 19 VIA 82C694 ATX Mainboard HARDWARE SETUP (N) CN16: WOL (Wake On LAN) Connector In order to use the WOL LAN card to trigger the power of the PC system, the switching power supply must be able to provide at least 700mA current driving ability on the “5V standby”...
  • Page 20 VIA 82C694 ATX Mainboard HARDWARE SETUP (P) CN18: Audio/Game Connector: There is the 3D audio interface built on this mainboard (audio interface is optional on the board.). Please refer to the following picture for the audio interface. 1. SPK_OUT CN18 2.
  • Page 21 VIA 82C694 ATX Mainboard HARDWARE SETUP (R) CN30: USB Port 3 (Universal Serial Bus) Connector (S) CN31: USB Port 4 (Universal Serial Bus) Connector In order to connect the USB device, you will need to have the USB cable connected to the CN30 and CN31. Wrong USB cable may cause serious damage to this mainboard.

  • Page 22: Hl Ide Hdd Led Connector

    VIA 82C694 ATX Mainboard HARDWARE SETUP (T) Push buttons and LED connectors A series of connectors are designed on the board to connect the push buttons and LED indicators. Followings are the details: RS: Reset Button connector HL: HDD LED connector SL: Sleep LED connector PW: Power On / Off Suspend switch SL HL RS...
  • Page 23 VIA 82C694 ATX Mainboard HARDWARE SETUP Power On / Off and External Suspend Switch Connector According to the setup in CMOS, the PW connector has two functions. It can be the Power Switch or Suspend Switch of your PC system. (please refer to the Aware BIOS setup in Section 4) ...
  • Page 24 VIA 82C694 ATX Mainboard HARDWARE SETUP (U) Speaker and Power LED connector: 1 2 3 4 1 2 3 4 PWRLED Speaker & Power LED Connectors SPK: Speaker connector Pin # Signal name + 5V DC No Connection No Connection Speaker Data Signal PWRLED: Front Panel Power LED and Key-Lock Connector...

  • Page 25: Jumpers

    VIA 82C694 ATX Mainboard HARDWARE SETUP 3.4 JUMPERS This section will discuss the jumper setting on the mainboard. In order to let you have better idea of the jumper setting, please see below for the explanation of jumper settings before you start this section. open short A jumper is a set of two, three or more jumper pins which allow users to make different...
  • Page 26 VIA 82C694 ATX Mainboard HARDWARE SETUP (B) JP2: CPU Voltage Range Selection (Optional) JP2 is a special design on the mainboard which allows you to select the CPU voltage range (Vcore) for the Pentium !!! or Celeron processor. The voltage regulator on the mainboard will generate 1.3V ~ 3.5V DC to support different processors.
  • Page 27 VIA 82C694 ATX Mainboard HARDWARE SETUP (C) JP9: CMOS Data Clear Button 1-2 Short: Normal Setting. 2-3 Short: Clear CMOS. 1 2 3 Basically, the BIOS setup program will have all the setting saved in the CMOS memory which is included in the core logic of the mainboard. If you want to clear the setting which is saved in the CMOS memory, you may use JP9 and refer to the following procedure to clear the information in the CMOS.
  • Page 28 VIA 82C694 ATX Mainboard HARDWARE SETUP (D) SW1: CPU Front Side Bus (FSB) Speed Selection SW1 is designed on the mainboard to select the CPU FSB speed. Please refer to the following for the settings: FSB Clock SW 1-1 SW 1-2 SW 1-3 SW 1-4 AUTO...
  • Page 29 VIA 82C694 ATX Mainboard HARDWARE SETUP (E) SW2: CPU Clock Ratio Selection (Optional) SW2 is designed on the mainboard to select the CPU clock ratio. Basically, the CPU clock ratio will be decided by the CPU automatically. When you have installed the CPU onto the mainboard, the CPU clock ratio is decided automatically and you can not use the switch setting on SW2 to change the clock ratio.

  • Page 30: Installation Of Device Drivers

    VIA 82C694 ATX Mainboard HARDWARE SETUP 3.5 INSTALLATION OF DEVICE DRIVERS IMPORTANT NOTE: Please refer to the following sequence to install the related device drivers: 1. Install the device drivers for the mainboard. 2. Install the device driver for the onboard sound interface. 3.

  • Page 31: Award Bios Setup

    VIA 82C693 AWARD BIOS SETUP MAINBOARD AWARD BIOS SETUP 4.1 GETTING STARTED When the system is first time power on or reset by user, the BIOS will enter the Power On Self Test routines ( POST, which will display a copyright message on the screen and execute a diagnostics and initialization procedure.) In case that there is any error or malfunction detected, the BIOS will give a series of beeping sound or display the error message on screen.

  • Page 32: Main Menu

    VIA 82C694 ATX Mainboard AWARD BIOS SETUP 4.2 MAIN MENU ROM PCI / ISA BIOS (2A69KXXX) CMOS SETUP UTILITY AWARD SOFTWARE, INC. Standard CMOS Setup Frequency / Voltage Control Advanced BIOS Features Load Optimized Defaults Advanced Chipset Features Set Supervisor Password Integrated Peripherals Set User Password Power Management Setup...

  • Page 33: Standard Cmos Setup

    VIA 82C694 ATX Mainboard AWARD BIOS SETUP The following pages will show all the setup screens which you will find in the CMOS SETUP routine, each figure contains the selection options and its default settings. At the bottom of some screen, you may find the description of all function key which can be used to change the settings.
  • Page 34 VIA 82C694 ATX Mainboard AWARD BIOS SETUP CMOS Setup Utility - Coryright ( C ) 1984 - 2000 Award Software. Advanced BIOS Features Virus Warning :Disabled Item Help CPU Internal Cache : Enabled Ø External Cache : Enabled Menu Level CPU L2 Cache ECC Checking : Enabled Processor Number Feature...
  • Page 35 VIA 82C694 ATX Mainboard AWARD BIOS SETUP attempts to access the boot sector or hard disk partition table. Disabled : No warning message will appear on the screen when anything attempts to access the boot sector or hard disk partition table. CPU Internal Cache / External Cache : These fields allow you to turn on or turn off the Level 1 and Level 2 cache that built-in Pentium™...
  • Page 36 VIA 82C694 ATX Mainboard AWARD BIOS SETUP Boot Up NumLock Status : When enabled, the NumLock LED will be lightened after the POST. Security Option : This selection field allows you to select how to secure the PC system for you. There are two choice selectable - "Setup"...

  • Page 37: Advanced Chipset Features

    VIA 82C694 ATX Mainboard AWARD BIOS SETUP 4.6 ADVANCED CHIPSET FEATURES CMOS Setup Utility - Copyright (C) 1984 - 1999 Award Software Advanced Chipset Features Bank 0/1 DRAM Timing :SDRAM 10ns Item Help Bank 2/3 DRAM Timing SDRAM 10ns Ø Bank 4/5 DRAM Timing SDRAM 10ns Menu Level...
  • Page 38 VIA 82C694 ATX Mainboard AWARD BIOS SETUP DRAM Settings The first chipset settings deal with CPU access to dynamic random access memory (DRAM). The default timings have been carefully chosen and should only be altered if data is being lost. Such a scenario might well occur if your system had mixed speed DRAM chips installed so that greater delays may be required to preserve the integrity of the data held in the slower memory chips.
  • Page 39 VIA 82C694 ATX Mainboard AWARD BIOS SETUP Video RAM Cacheable Select Enabled allows caching of the video RAM , resulting in better system performance. However, if any program writes to this memory area, a system error may result. AGP Aperture Size Select the size of Accelerated Graphics Port (AGP) aperture.
  • Page 40 VIA 82C694 ATX Mainboard AWARD BIOS SETUP CPU to PCI Write buffer When this field is Enabled, writes from the CPU to the PCI bus are buffered, to compensate for the speed differences between the CPU and the PCI bus. When Disabled, the writes are not buffered and the CPU must wait until the write is complete before starting another write cycle.

  • Page 41: Integrated Peripherals

    VIA 82C694 ATX Mainboard AWARD BIOS SETUP 4.7 INTEGRATED PERIPHERALS CMOS Setup Utility - Copyright (C) 1984 - 1999 Award Software Integrated Peripherals On-Chip IDE Chanel0 Enabled Item Help On-Chip IDE Chanel1 Enabled Ø IDE Prefetch Mode Enabled Menu Level Primary Master PIO Auto Primary Slave PIO...
  • Page 42 VIA 82C694 ATX Mainboard AWARD BIOS SETUP IDE Prefetch Mode The onboard IDE drive interfaces supports IDE prefetching for faster drive accesses. If you install a primary and/or secondary add-in IDE interface, set this field to Disabled if the interface does not support prefetching. Primary/Secondary, Master/Slave PIO The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of the four IDE devices that the onboard IDE interface supports.
  • Page 43 VIA 82C694 ATX Mainboard AWARD BIOS SETUP IR Function Duplex This item allows you to select the IR half/full duplex funcion. TX,RX inverting enable This item allow you to enable the TX, RX inverting which depends on different H/W requirement. This field is not recommended to change its default setting for avoiding any error in your system.

  • Page 44: Power Management Setup

    VIA 82C694 ATX Mainboard AWARD BIOS SETUP POWER MANAGEMENT SETUP CMOS Setup Utility - Copyright (C) 1984 - 1999 Award Software Power Management Setup ACPI Function Disabled Item Help Ø Power Management Press Enter Menu Level ACPI Suspend Type S1 (POS) PM Control By APM Video Off Option Suspend ->...
  • Page 45 VIA 82C694 ATX Mainboard AWARD BIOS SETUP Disable No power management. Disable all power saving modes. Minimum power management. Doze Mode = 1 hr. Min. Power Saving Standby Mode = 1 hr., Suspend Mode = 1 hr., and HDD Power Down = 15 min. Maximum power management -- ONLY AVAILABLE Max.
  • Page 46 VIA 82C694 ATX Mainboard AWARD BIOS SETUP Suspend --> Off Monitor blanked when the systems enters the Suspend mode. Susp,Stby --> Off Monitor blanked when the system enters either Suspend or Standby modes. Modes --> Monitor blanked when the system enters any power saving mode.
  • Page 47 VIA 82C694 ATX Mainboard AWARD BIOS SETUP This field allows to select the suspend type, you can choose the CPU Stopy Grand Suspend or the PwrOn Suspend. Wake Up Events: When click the "Enter" key on this selection field, the following setup screen will be triggered: Item Help Ø...
  • Page 48 VIA 82C694 ATX Mainboard AWARD BIOS SETUP Resume Time (hh:mm:ss) WhenRTC Alarm Resume is enabled, your can set the date and time at which the RTC (real-time clock) alarm awakens the system from Suspend mode. IRQs Activity Monitoring The following is a list of IRQ’s, Interrupt ReQuests, which can be exempted much as the COM ports and LPT ports above can.

  • Page 49: Pnp/Pci Configuration

    VIA 82C694 ATX Mainboard AWARD BIOS SETUP 4.9 PNP/PCI CONFIGURATION CMOS Setup Utility - Copyright (C) 1984 - 1999 Award Software PnP/PCI Configuration PnP OS Installed Item Help Reset Configuration Data : Disabled Ø Resources Controlled By : Auto (ESCD) Menu Level IRQ Resources : Press Enter...
  • Page 50 VIA 82C694 ATX Mainboard AWARD BIOS SETUP IRQ Resources When resources are controlled manually, assign each system interrupt a type, depending on the type of device using the interrupt Legacy ISA Devices compliant with the original PC AT bus specification, requiring a specific interrupt ( such as IRQ4 for serial port 1).

  • Page 51: Pc Health Status

    VIA 82C694 ATX Mainboard AWARD BIOS SETUP 4.10 PC HEALTH STATUS CMOS Setup Utility - Copyright (C) 1984 - 1999 Award Software PC Health Status Current CPU Temp. C/134 Item Help Current System Temp. C/77 Ø Current CPUFAN1 Speed 4647 RPM Menu Level Current CPUFAN2 Speed 0 RPM...

  • Page 52: Frequency/Voltage Control

    VIA 82C694 ATX Mainboard AWARD BIOS SETUP 4.11 FREQUENCY/VOLTAGE CONTROL CMOS Setup Utility - Copyright (C) 1984 - 1999 Award Software Frequency/Voltage Control Auto Detact DIMM/PCI Clk Enabled Item Help Spread Spectrum Disabled Ø CPU Host / PCI Clock Default Menu Level Auto Detect DIMM/PCI Clk When “Enabled”...

  • Page 53: Load Optimized Defaults

    VIA 82C694 ATX Mainboard AWARD BIOS SETUP 4.12 LOAD OPTIMIZED DEFAULTS CMOS Setup Utility - Copyright (C) 1984 - 1999 Award Software Standard CMOS Features Frequency / Voltage Control Advanced BIOS Features Load Optimized Defaults Advanced Chipset Features Set Supervisor Password Integrated Peripherals Set User Password Power Management Setup...

  • Page 54: Set Supervisor Password

    VIA 82C694 ATX Mainboard AWARD BIOS SETUP 4.13 SET SUPERVISOR PASSWORD CMOS Setup Utility - Copyright (C) 1984 - 1999 Award Software Standard CMOS Features Frequency / Voltage Control Advanced BIOS Features Load Optimized Defaults Advanced Chipset Features Set Supervisor Password Integrated Peripherals Set User Password Power Management Setup...

  • Page 55: Set User Password

    VIA 82C694 ATX Mainboard AWARD BIOS SETUP 4.14 SET USER PASSWORD CMOS Setup Utility - Copyright (C) 1984 - 1999 Award Software Standard CMOS Features Frequency / Voltage Control Advanced BIOS Features Load Optimized Defaults Advanced Chipset Features Set Supervisor Password Integrated Peripherals Set User Password Power Management Setup...

  • Page 56: Save & Exit Setup / Exit Without Saving

    VIA 82C694 ATX Mainboard AWARD BIOS SETUP When turn on the PC system, it will request you to enter the Password. Without the correct password, the PC system will stop and the operation system will not be loaded. 4.15 SAVE & EXIT SETUP / EXIT WITHOUT SAVING CMOS Setup Utility - Copyright (C) 1984 - 1999 Award Software Standard CMOS Features Frequency / Voltage Control...

This manual is also suitable for:

694txl

Table of Contents