Memory Seat And Mirrors - Buick 2003 LeSabre Owner's Manual

Vehicle Personalimati
Memory Seat and Mirrors
To save your seat and mirror positions into memory,
use the following procedure:
1. First identify the DRIVER # on the Driver Information
Center (DIC) by pressing the MEMORY button 1
or 2 or by pressing the unlock button on the remote
keyless entry transmitter. See Driver Information
Center (DIC) on page 3-47.
2. Adjust the driver's seat and lumbar position to a
safe and comfortable driving position. Adjust both
outside mirrors to suit you. See Outside Power
Mirror on page 2-38.
corresponding with your DRIVER # displayed on the
DIC for longer than three seconds. You will hear
positions have been entered into memory.
3. Press and hold the MEMORY button (1 or 2)
.
two beeps confirming that the seat and mirror
If your vehicle has this feature, the controls are located on
To set the seat and mirror positions for a second driver,
the driver's door panel, and are used to program and
follow the previous steps, but start by pressing the
recall memory settings for the driver's seating, outside
unlock button on the transmitter that displays the other
mirror positions and climate controls. See Climate Control
DRIVER # on the DIG. B~ Sure to use the MEMORY
System on page
3-23
for more information.
bljtton which
corresponds to the DRIVER # identified by
the second transmitter.
2-49