Buick 2003 LeSabre Owner's Manual page 148

Table of Contents

Advertisement

Manual Operation
Pressing the FAN or AIR FLOW buttons cancels
automatic operation and places the system in manual
mode. Press the AUTO button to return to automatic
operation.
TEMP (Temperature): To manually adjust the
temperature inside the vehicle, push the TEMP arrow.
Push the TEMP up arrow for warmer temperature
settings and the TEMP down arrow for cooler
temperature settings. The setting will be shown on the
display. The display will return to the outside
temperature after a few seconds.
@
FAN: Pressing the FAN button will display and hold
the current fan speed while in manual mode. If you
want the fan to run at a lower speed, push
the down
arrow on the FAN button. If you want to increase the fan
speed, push the up arrow on the FAN button.
AIR FLOW: Pressing the AIR FLOW button will display
and hold the current setting while in manual mode.
Use the 'up and down arrows on the AiR FLOVV bui'ron
to cycle through the available modes.
WINDSHIELD-FLOOR: This mode directs most of the
airflow to the windshield with some airflow to the
outboard outlets (for the side windows) and the floor
outlets.
MID: This mode directs airflow through the instrument
panel outlets.
MID-FLOOR: This mode directs airflow through both
the floor and the instrument panel outlets. There is also
a small amount of air directed to the windshield and
the outboard outlets (for the side windows).
FLOOR: This mode directs most of the airflow to the
floor outlets with some directed to the outboard
outlets (for the side windows) and the windshield.
OFF: Press the OFF button once to turn off the
passenger climate control, if it has been activated.
Pressing the OFF button a second time will turn off the
main system. The outside temperature will be shown
on the display when the system is off.
VENT (Flow-Through Ventilation): Pressing the VENT
button allows outside air to flow through your vehicle
without the air conditioning compressor working. To turn
off the VENT selection, push the VENT button again.
Selecting the VENT and AUTO buttons at the same time
allows the system to coniroi the airiiow auturr1aiir;aiiy
without using the air conditioning compressor or
the recirculation mode.
3-27

Advertisement

Table of Contents
loading

Table of Contents