Memory Settings For Driver's Seat, Mirrors, Pedals, Radio And Climate Control; Programmable Automatic Power Door Locks - Buick Rainier 2004 Getting To Know Manual

Getting to Know Your Rainier
6
Memory Settings for Driver's
Seat, Mirrors, Pedals, Radio and
Climate Controls
Use the driver's door mounted controls
(shown above) to program and recall
memory settings for the following
features:
• Drivers' seat, including seatback
recliner and lumbar adjustment
• Accelerator and brake pedals
• Outside rearview mirrors
• Radio station presets
• Climate control temperature
Programming a Memory Setting
• Adjust the above features to your
preferred settings.
• Press and hold memory 1 or 2 button
located on the driver's door until two
chimes sound (about three seconds).
This confirms that your settings are
stored.
• To program memory positions for
another driver, repeat the process
using the other memory button.
Recalling Memory Settings
Each time memory button 1 or 2 on the
driver's door is pressed while the vehicle
is in PARK (P), a single chime will
sound and the memory position(s) will
be recalled.
If you unlock the vehicle with the remote
keyless transmitter, the memory settings
will be recalled based on the number
shown on the back of the key fob. Note:
In order to use the memory feature with
your remote keyless transmitter, the
memory features must be programmed
in your Driver Information Center. See
"Vehicle Personalization" under the
Driver Information Center section of this
booklet for instructions.
See Section 2 of your Owner Manual.
Programmable Automatic Power
Door Locks
Your vehicle features an automatic door
lock/unlock feature with a choice of four
features, as well as automatic door lock-
out prevention to prevent locking the
keys in the vehicle. In the event the
power door lock switch is activated
when a door is open and the key is in
the ignition, the driver door will unlock.
Locking Options: The default setting
for the programmable automatic power
door locks is to lock automatically when
the transmission is shifted into gear
(Mode 1). Other locking options include:
Mode 2: All doors lock when vehicle
speed is over 8 mph (13 kph)
Mode 3: No automatic door locking
Unlocking options: Choose one of the
following options before personalizing
your unlocking preference:
Mode 1: Driver door unlocks when the
transmission is placed into PARK
Mode 2: All doors unlock when the
transmission is shifted into PARK