Front Turn Signal Lamps; Taillamps, Turn Signal, And Stoplamps - Buick 2003 LeSabre Owner's Manual

3. Remove the headlamp assembly to access
the bulbs.
4.
5.
6.
Turn the bulb retainer counterclockwise to remove it
from the bulb assembly.
Pull the old bulb straight out from the retainer.
Push the new bulb straight into the retainer.
Reverse Steps 1 through 4 to reinstall the headlamp
assembly.
Front Turn Signal Lamps
Once the headlamp assembly has been removed from
the vehicle, the front turn signal bulbs can be accessed.
1. Reach down into the space provided by the
removal of the headlamp assembly and, while
pushing in the tab on the bulb assembly, turn the
assembly counterclockwise and remove it.
2. Remove the old bulb by pulling it straight out of
the retainer.
3.
Install the new bulb and turn the bulb assembly
back into place.
Taillamps, Turn Signal, and
Stoplamps
1. Open the trunk. Turn the screws located just inside
of the trunk counterclockwise and remove them.
2. Remove the plastic trim piece from the trunk.
3. Pull the carpet away from the rear area to access
the turn signal bulb assembly.
5-56